730079
124
Zoom out
Zoom in
Previous page
1/191
Next page
Chapter 18 VPN
LTE3316-M604 User’s Guide
124
18.5 GRE
GRE tunnels encapsulate a wide variety of network layer protocol packet types inside IP tunnels. A GRE
tunnel serves as a virtual point-to-point link between the LTE and another router over an Internet
protocol network.
Remote Subnet Specify the remote subnet for this L2TP tunnel to reach L2TP server. The Remote
Subnet format must be IP address/netmask (e.g. 10.0.0.2/24).
The Remote Subnet is used for the L2TP VPN server’s Intranet. At the L2TP client’s side,
the packets whose destination is in the dedicated subnet will be transferred via the
L2TP VPN tunnel. Other packets will be transferred based on current routing policy of
the security gateway at L2TP client peer.
If you entered 0.0.0.0/0 in the Remote Subnet field, the L2TP server will be treated as
a default gateway setting for the L2TP client. This means all packets, including the
Internet accessing of L2TP Client, will go through the established L2TP VPN tunnel.
Tunneling Password
(Option)
Enter the password for this L2TP VPN tunnel to be authenticated by the L2TP Server.
LCP Echo Type Specify the Link Control Protocol (LCP) Echo Type for this tunnel. This means the LTE
checks the PPP connection to a remote client using LCP requests.
In the Interval field define how often the LCP requests are prompted. If there is no
reply to an LCP request then the remote client is checked in shorter intervals. Define
how many times the LTE tries to reach the remote site in the Max. Failure Time.
Select Auto for the LTE to automatically set the Interval and Max. Failure Time.
Select User-defined to define the Interval and Max. Failure Time. The default
values is 30 seconds and 6 Times respectively.
Select Disable to disable LCP Echo Type.
Service Port Select Auto for the LTE to automatically define the service port for the L2TP tunnel
to use.
Select 1701 (for Cisco) for the LTE to use port 1701 to connect to the Cisco L2TP
server.
Select User-defined to define the service port (1~65535) for the L2TP tunnel to
use.
Back Click Back to return to the previous screen without saving.
Cancel
Click Cancel to exit this screen without saving.
Apply Click Apply to save your changes back to the LTE.
Table 51 L2TP Client: Add (continued)
LABEL DESCRIPTION
124


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for ZyXEL LTE3316-M604 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of ZyXEL LTE3316-M604 in the language / languages: English as an attachment in your email.

The manual is 3,64 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of ZyXEL LTE3316-M604

ZyXEL LTE3316-M604 Quick start guide - All languages - 4 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info