730079
80
Zoom out
Zoom in
Previous page
1/191
Next page
Chapter 8 Wireless LAN
LTE3316-M604 User’s Guide
80
8.7 Quality of Service (QoS)
The QoS screen allows you to automatically give a service (such as VoIP and video) a priority level.
Click Configuration > Network > Wireless LAN > QoS. The following screen appears.
Figure 37 Configuration > Network > Wireless LAN > QoS
The following table describes the labels in this screen.
Green AP Select Enable to reduce the power consumption by adjusting the output power. The LTE
reduces the output power of the transmitter from about 260mA to 188mA when there is no
IEEE 802.11 wireless clients associated with the LTE wireless network.
Tx Power Set the output power of the LTE in this field. If there is a high density of APs in an area,
decrease the output power of the LTE to reduce interference with other APs. Select one of
the following 100%, 90%, 75%, 50%, 25% or 10%.
Beacon Interval When a wirelessly networked device sends a beacon, it includes with it a beacon interval. This
specifies the time period before the device sends the beacon again. The interval tells
receiving devices on the network how long they can wait in low-power mode before waking
up to handle the beacon. A high value helps save current consumption of the access point.
Apply Click Apply to save your changes back to the LTE.
Cancel Click Cancel to reload the previous configuration for this screen.
Table 24 Configuration > Network > Wireless LAN > Advanced (continued)
LABEL DESCRIPTION
Table 25 Configuration > Network > Wireless LAN > QoS
LABEL DESCRIPTION
WMM QoS (2.4G) Select Enable to have the LTE automatically give a service a priority level according to
the ToS value in the IP header of packets it sends. WMM QoS (Wifi MultiMedia Quality of
Service) gives high priority to voice and video, which makes them run more smoothly.
This field is not configurable and the LTE automatically enables WMM QoS if you select
802.11n, 802.11g/n Mixed, or 802.11b/g/n Mixed in the Wireless LAN > General screen.
WMM QoS (5G) Select Enable to have the LTE automatically give a service a priority level according to
the ToS value in the IP header of packets it sends. WMM QoS (Wifi MultiMedia Quality of
Service) gives high priority to voice and video, which makes them run more smoothly.
This field is not configurable and the LTE automatically enables WMM QoS if you select
802.11n, 802.11a/n Mixed, or 802.11a/n/ac Mixed in the Wireless LAN > General screen.
Apply Click Apply to save your changes to the LTE.
Cancel Click Cancel to reload the previous configuration for this screen.
80


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for ZyXEL LTE3316-M604 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of ZyXEL LTE3316-M604 in the language / languages: English as an attachment in your email.

The manual is 3,64 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of ZyXEL LTE3316-M604

ZyXEL LTE3316-M604 Quick start guide - All languages - 4 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info