730079
69
Zoom out
Zoom in
Previous page
1/191
Next page
Chapter 8 Wireless LAN
LTE3316-M604 User’s Guide
69
Hide SSID Select this check box to hide the SSID in the outgoing beacon frame so a station cannot
obtain the SSID through scanning using a site survey tool.
Channel Selection Set the operating frequency/channel depending on your particular region.
Select a channel from the drop-down list box. The options vary depending on the frequency
band and the country you are in.
Refer to the Connection Wizard chapter for more information on channels. This option is only
available if Auto Channel Selection is disabled.
Auto Channel
Selection
Select this check box for the LTE to automatically choose the channel with the least
interference. De-select this check box if you wish to manually select the channel using the
Channel Selection field.
Operating
Channel
This displays the operating frequency/channel depending on your particular region.
Channel Width Select the wireless channel width used by LTE.
A standard 20 MHz channel(HT20) offers transfer speeds of up to 144 Mbps (2.4G) or 217 Mbps
(5G) whereas a 40 MHz channel(HT40) uses two standard channels and offers speeds of up to
300 Mbps (2.4G) or 450 Mbps (5G). An IEEE 802.11ac-specific 80 MHz channel (HT80) offers
speeds of up to 1.3 Gbps.
Because not all devices support 40 MHz and/or 80 MHz channels, select Auto to allow the LTE
to adjust the channel bandwidth automatically.
HT40 (channel bonding or dual channel) bonds two adjacent radio channels to increase
throughput. A HT80 channel consists of two adjacent 40 MHz channels. The wireless clients
must also support HT40 or HT80. It is often better to use the 20 MHz setting in a location where
the environment hinders the wireless signal.
Select HT20 if you want to lessen radio interference with other wireless devices in your
neighborhood or the wireless clients do not support channel bonding.
802.11 Mode In Wireless Setup for 2.4G network you can select from the following:
802.11b Only: allows either IEEE 802.11b compliant WLAN devices to associate with the LTE.
In this mode, all wireless devices can only transmit at the data rates supported by IEEE
802.11b.
802.11g Only: allows IEEE 802.11g compliant WLAN devices to associate with the Device.
IEEE 802.11b compliant WLAN devices can associate with the LTE only when they use the
short preamble type.
802.11n Only: allows IEEE 802.11n compliant WLAN devices to associate with the LTE. This
can increase transmission rates, although IEEE 802.11b or IEEE 802.11g clients will not be
able to connect to the LTE.
802.11b/g Mixed: allows either IEEE 802.11b or IEEE 802.11g compliant WLAN devices to
associate with the LTE. The LTE adjusts the transmission rate automatically according to the
wireless standard supported by the wireless devices.
802.11g/n Mixed: allows either IEEE 802.11g or IEEE 802.11n compliant WLAN devices to
associate with the LTE. The transmission rate of your LTE might be reduced.
802.11b/g/n Mixed: allows IEEE802.11b, IEEE802.11g and IEEE802.11n compliant WLAN
devices to associate with the LTE. The transmission rate of your LTE might be reduced.
In Wireless Setup for 5G network you can select from the following:
802.11a Only: allows only IEEE 802.11a compliant WLAN devices to associate with the LTE.
802.11n Only: allows IEEE 802.11n compliant WLAN devices to associate with the LTE. This
can increase transmission rates, although IEEE 802.11a clients will not be able to connect
to the LTE.
802.11a/n Mixed: allows both IEEE802.11n and IEEE802.11a compliant WLAN devices to
associate with the LTE. The transmission rate of your LTE might be reduced.
802.11a/n/ac Mixed: allows both IEEE802.11a, IEEE802.11n and IEEE802.11ac compliant
WLAN devices to associate with the LTE. The transmission rate of your LTE might be
reduced.
Security - 2.4G / Security - 5G
Table 18 Configuration > Network > Wireless LAN > General (continued)
LABEL DESCRIPTION
69


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for ZyXEL LTE3316-M604 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of ZyXEL LTE3316-M604 in the language / languages: English as an attachment in your email.

The manual is 3,64 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of ZyXEL LTE3316-M604

ZyXEL LTE3316-M604 Quick start guide - All languages - 4 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info