730079
62
Zoom out
Zoom in
Previous page
1/191
Next page
Chapter 7 WAN
LTE3316-M604 User’s Guide
62
Primary DNS Address Enter the first IPv6 DNS server address assigned by the ISP.
Secondary DNS
Address
Enter the second IPv6 DNS server address assigned by the ISP.
(These fields appear when the IPv6 Connection is set to PPPoE.)
Address Mode Select Dynamic IP if you have a dynamic IP address.
Select Static IP if the ISP assigned a fixed IP address.
IP Address Enter the static IP address provided by your ISP.
Username Enter a user name (of up to 31 printable characters) for login using PPPoE connection.
Password Enter the password associated with the user name above.
Service Name Enter the name of your PPPoE service here.
Reconnect Mode Select Auto Reconnect (always-on) if you do not want the connection to time out.
Select Connection-on-Demand if you want to connect for a certain amount of time
before the router automatically disconnects from the PPPoE server. If you select this you
will need to enter the number of minutes in the Maximum Idle Time field.
Select Manually if want to make the connection manually.
Maximum Idle Time Specify the time in minutes that elapses before the LTE automatically disconnects from
the PPPoE server.
(These fields appear when the IPv6 Connection is set to 6RD.)
Remote IPv4 Address Enter the IPv4 address of the relay server,
IPv4 Mask Length Enter the IPv4 subnet mask number (1 to 32).
Remote Prefix Enter an IPv6 prefix for tunneling IPv6 traffic to the ISP’s Border Relay router and
connecting to the native IPv6 Internet.
Prefix Length Enter the address prefix length to specify how many most significant bits in an IPv6
address compose the network address.
Primary DNS Address
Enter the first IPv6 DNS server address assigned by the ISP.
Secondary DNS
Address
Enter the second IPv6 DNS server address assigned by the ISP.
LAN IPv6 Address Enter the IPv6 address for the LTE LAN interface in this field.
LAN IPv6 Link-Local
Address
This shows the IPv6 Link-local address in the LAN side. This is used by LTE when
communicating with neighboring devices on the same link. It allows IPv6-capable
devices to communicate with each other in the LAN side.i
Auto configuration Click Enable if you want the devices on your local area network to obtain network
address that are not managed by a DHCPv6 server. Otherwise, select Disable.
Auto configuration
Type
Select Stateless if you want the LTE interface to automatically generate a link-local
address via stateless auto configuration.
Select Stateful (DHCPv6) when the devices connected to your LAN needs to have their
TCP/IP configuration set to DHCPv6 or obtain an IPv6 address automatically.
IPv6 Address Range
(Start)
If you select Stateful (DHCPv6), specify the range of IPv6 addresses from which the
DHCPv6 server assigns to the clients. Enter the smallest value of the last block of the IPv6
addresses which are to be allocated.
IPv6 Address Range
(End)
If you select Stateful (DHCPv6), specify the range of IPv6 addresses from which the
DHCPv6 server assigns to the clients. Enter the largest value of the last block of the IPv6
addresses which are to be allocated.
IPv6 Address Lifetime If you select Stateful (DHCPv6), specify how long (in minutes) the IPv6 addresses remain
valid.
Table 15 Configuration > Network >WAN > IPv6 (continued)
LABEL DESCRIPTION
62


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for ZyXEL LTE3316-M604 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of ZyXEL LTE3316-M604 in the language / languages: English as an attachment in your email.

The manual is 3,64 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of ZyXEL LTE3316-M604

ZyXEL LTE3316-M604 Quick start guide - All languages - 4 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info