730079
56
Zoom out
Zoom in
Previous page
1/191
Next page
Chapter 7 WAN
LTE3316-M604 User’s Guide
56
Network Type Select the type of the network (4G or 3G) to which you want the LTE to connect.
Otherwise, select Auto to have the LTE connect to an available network using the default
settings on the SIM card. If the currently registered mobile network is not available or the
mobile network’s signal strength is too low, the LTE switches to another available mobile
network.
Band Selection Select Manual to select the frequency bands the LTE uses to connect to the mobile
network. Otherwise, select Auto to have the LTE connect to any available frequency
band using the default settings
Band List Select the frequency bands you want the LTE to use to connect to the mobile network.
You can only select the frequency bands from this list if you selected Manual in the Band
Selection field.
Roaming 3G/4G roaming is to use your mobile device in an area which is not covered by your
service provider. Enable roaming to ensure that your LTE is kept connected to the
Internet when you are traveling outside the geographical coverage area of the network
to which you are registered.
Dial-Up Profile Select Auto-Detection to have the LTE use the inserted SIM card’s default settings to
connect to any available mobile network.
Select Manual and enter the information provided by your service provider to connect to
the service provider’s mobile network.
APN Connections with different APNs (Access Point Names) may provide different services
(such as Internet access or MMS (Multi-Media Messaging Service)) and charge method.
The corresponding APN automatically displays when you select a pre-defined service
provider.
If you select Manual in the Dial-Up Profile field, manually enter the APN provided by your
service provider. You can enter up to 32 ASCII printable characters. Spaces are allowed.
Dial Number This is the phone number (dial string) used to dial up a connection to your service
provider’s base station. Your service provider should provide the phone number. For
example, *99# is the dial string to establish a GPRS or 3G/4G connection in Taiwan.
The corresponding phone number automatically displays when you select a pre-defined
service provider.
If you select Others in the Service Provider field, manually enter the phone number
provided by your service provider.
Account Type the user name (of up to 64 ASCII printable characters) given to you by your service
provider.
Password Type the password (of up to 64 ASCII printable characters) associated with the user
name above.
Authentication The LTE supports PAP (Password Authentication Protocol) and CHAP (Challenge
Handshake Authentication Protocol). CHAP is more secure than PAP; however, PAP is
readily available on more platforms
Select an authentication protocol (PAP, or CHAP) used by the service provider.
Otherwise, select Auto to have the LTE accept either CHAP or PAP.
IP Type Select IPv4 if you want the LTE3202-M430 to run IPv4 only.
Select IPv6 if you want the LTE3202-M430 to run IPv6 only.
Select IPv4/IPv6 to allow the LTE3202-M430 to run IPv4 and IPv6 at the same time.
IP Mode Select Dynamic IP if you have a dynamic IP address.
Select Static IP if you have a fixed IP address assigned by your service provider.
IP Address Enter your WAN IP address in this field if you selected Static IP in the IP Mode field.
IP Subnet Mask Enter the subnet mask in this field if you selected Static IP in the IP Mode field.
Table 12 Management WAN Edit: 3G/4G (continued)
LABEL DESCRIPTION
56


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for ZyXEL LTE3316-M604 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of ZyXEL LTE3316-M604 in the language / languages: English as an attachment in your email.

The manual is 3,64 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of ZyXEL LTE3316-M604

ZyXEL LTE3316-M604 Quick start guide - All languages - 4 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info