730080
82
Zoom out
Zoom in
Previous page
1/202
Next page
Chapter 7 Wireless LAN
LTE3302-M432 & LTE3312-M432 User’s Guide
82
7.6 Wireless LAN Advanced Screen
Use this screen to allow wireless advanced features, such as the output power, RTS/CTS Threshold
settings.
Click Configuration > Network > Wireless LAN > Advanced. The screen appears as shown.
Figure 50 Configuration > Network > Wireless LAN > Advanced
The following table describes the labels in this screen.
Table 29 Configuration > Network > Wireless LAN > Advanced
LABEL DESCRIPTION
Wireless Advanced Setup
RTS/CTS Threshold Data with its frame size larger than this value will perform the RTS (Request To Send)/CTS (Clear
To Send) handshake.
This field is not configurable and the LTE Device automatically changes to use the maximum
value if you select 802.11n, 802.11gn or 802.11bgn in the Wireless LAN > General screen.
Fragmentation
Threshold
The threshold (number of bytes) for the fragmentation boundary for directed messages. It is
the maximum data fragment size that can be sent.
This field is not configurable and the LTE Device automatically changes to use the maximum
value if you select 802.11n, 802.11gn or 802.11bgn in the Wireless LAN > General screen.
Intra-BSS Traffic A Basic Service Set (BSS) exists when all communications between wireless clients or between
a wireless client and a wired network client go through one access point (AP).
Intra-BSS traffic is traffic between wireless clients in the BSS. When Intra-BSS is enabled, wireless
clients can access the wired network and communicate with each other. When Intra-BSS is
disabled, wireless clients can still access the wired network but cannot communicate with
each other.
Green AP Select Enable to reduce the power consumption by adjusting the output power. The LTE
Device reduces the output power of the transmitter from about 260mA to 188mA when there
is no IEEE 802.11 wireless clients associated with the LTE Device wireless network.
Tx Power Set the output power of the LTE Device in this field. If there is a high density of APs in an area,
decrease the output power of the LTE Device to reduce interference with other APs. Select
one of the following 100%, 90%, 75%, 50%, 25% or 10%.
Beacon Interval When a wirelessly networked device sends a beacon, it includes with it a beacon interval. This
specifies the time period before the device sends the beacon again. The interval tells
receiving devices on the network how long they can wait in low-power mode before waking
up to handle the beacon. A high value helps save current consumption of the access point.
82


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for ZyXEL LTE3312-M432 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of ZyXEL LTE3312-M432 in the language / languages: English as an attachment in your email.

The manual is 6,87 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of ZyXEL LTE3312-M432

ZyXEL LTE3312-M432 Quick start guide - All languages - 4 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info