730080
64
Zoom out
Zoom in
Previous page
1/202
Next page
Chapter 6 WAN
LTE3302-M432 & LTE3312-M432 User’s Guide
64
6.5 Network Scan
Use this screen to set how you want the LTE Device to connect to an available mobile network. Click
Network > WAN > Network Scan from the Configuration menu.
Check Interval Type a number of seconds (0 to 99999) to set the time interval between checks. Allow
more time if your destination IP address handles lots of traffic.
Check Timeout Type the number of seconds (0 to 99999) for your LTE Device to wait for a response to the
ping or DNS query before considering the check to have failed. This setting must be less
than the Check Interval. Use a higher value in this field if your network is busy or
congested.
Latency Threshold Type a number of milliseconds (0 to 99999) for the latency threshold.
If the specified latency threshold is exceeded, the LTE Device considers the check to
have failed and makes a new connection after (Latency Threshold * Fail Threshold)
seconds.
Fail Threshold Type how many WAN connection checks can fail (0 to 99999) before the connection is
considered "down" (not connected). The LTE Device still checks a "down" connection to
detect if it reconnects.
Target1/Target2 Select DNS1 to have the LTE Device send a DNS query to the first DNS server address
assigned by the service provider.
Select DNS2 to have the LTE Device send a DNS query to the second DNS server address
assigned by the service provider.
Select Gateway to have the LTE Device ping the WAN interface's default gateway IP
address.
Select Other Host and enter a domain name or IP address of a reliable nearby computer
to have the LTE Device ping that address.
Bridge Select this check box to change the LTE Device’s operating mode to Bridge mode. The
computer connected to the first Ethernet LAN port is allowed to get an individual IP
address from the ISP’s DHCP server directly.
IGMP Select IGMP v1, IGMP v2, IGMP v3 or Auto to enable multicasting. This applies to traffic
routed from the WAN to the LAN.
Select Disable to turn off this feature. This may cause incoming traffic to be dropped or
sent to all connected network devices.
IGMP Proxy This field is available only when IGMP is enabled.
Select this option to have the LTE Device act as an IGMP proxy on this connection. This
allows the LTE Device to get subscribing information and maintain a joined member list
for each multicast group. It can reduce multicast traffic significantly.
IP Type Select IPv4 if you want the LTE Device to run IPv4 only.
Select IPv4/IPv6 to allow the LTE Device to run IPv4 and IPv6 at the same time.
Select IPv6 if you want the LTE Device to run IPv6 only.
Table 16 Configuration > Network > WAN > Management WAN Edit (continued)
LABEL DESCRIPTION
64


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for ZyXEL LTE3312-M432 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of ZyXEL LTE3312-M432 in the language / languages: English as an attachment in your email.

The manual is 6,87 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of ZyXEL LTE3312-M432

ZyXEL LTE3312-M432 Quick start guide - All languages - 4 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info