679708
27
Zoom out
Zoom in
Previous page
1/313
Next page
IES-1000 User’s Guide
1-2 Getting to Know the IES-1000
G.lite (ITU-T G.992.2)
G.hs (ITU-T G.994.1)
ANSI T1.413 issue 2
ETSI (TS 101 388)
Rate adaptation support
N-wire Mode (SAM1008)
The n-wire mode allows you to physically bundle two or four G.SHDSL ports into a single 4-wire or 8-wire
G.SHDSL connection.
1
This can increase the reach of G.SHDSL or give increased bandwidth when connecting to
4-wire mode G.SHDSL modems or another IES-1000. Given the same number of ports, n-wire mode provides
better throughput than (2-wire port) port bonding.
Port Bonding (SAM1008)
The port bonding feature allows you to combine two to eight G.SHDSL connections between two IES-1000s into
a single logical connection. You can combine individual ports or n-wire bundled groups. This can give increased
bandwidth for LAN-to-LAN applications.
Bridging
IEEE 802.1D transparent bridging
Up to 4096 MAC entries address table
Port-based VLAN (Virtual Local Area Network)
IEEE 802.1Q Tagged VLAN
Your IES-1000 uses the IEEE 802.1Q Tagged VLAN (Virtual Local Area Network), which allows your device to
deliver tagged/untagged frames to and from its ports. The IES-1000 supports up to 400 VLANs and up to 4094
VLAN IDs.
IEEE 802.1p Priority
Your IES-1000 uses IEEE 802.1p Priority to assign priority levels to individual ports.
Fast Mode
The fast mode makes use of the “tag” subset of the IEEE 802.1Q standard to identify the source port of a frame
and speed traffic through a service gateway.
MAC (Media Access Control) Filter
Use the MAC filter to filter incoming frames based on MAC (Media Access Control) address(es) that you specify.
You may enable/disable the MAC filter on specific ports. You may specify up to five MAC addresses per port.
MAC (Media Access Control) Count Filter
1
N-wire mode is available with the D0 hardware. The hardware version is in the serial number on the sticker on the
SAM1008 network module. You can also use the sys info command to display the hardware version.
27


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for ZyXEL IES-1000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of ZyXEL IES-1000 in the language / languages: English as an attachment in your email.

The manual is 5,11 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info