796886
62
Zoom out
Zoom in
Previous page
1/68
Next page
Gateway 400 User Guide | Glossary
62
N
NAT (Network Address Translation) NAT is a procedure used in the in Gateway 400
to connect the local network to the Internet. Only one public IP address is usu-
ally available for the Internet, whereas on the local network, by contrast, each
station has its own private IP address. These private addresses have no valid-
ity in public networks. In order to provide all the computers with private IP ad-
dresses access to the Internet, the Gateway 400 replaces the IP addresses of
the connected computers in all outgoing data packets with its own public IP
address. To enable the incoming data packets to be assigned to the correct
destination, the Gateway 400 the stored the current connections in a table.
Network The term network refers to a group multiple computers and other peripheral
devices connected together to share information. The interconnected com-
puters usually have shared access to the individual hardware components
(such as mass storage devices) on the network.In addition, consumer elec-
tronics devices such as TVs, set-top boxes, etc., can be controlled via networks.
A home network may be configured as a wired and/or wireless network,
where a wide range of different technologies such as Wi-Fi, USB or wired
Ethernet work together.
O
Offline Offline identifies an inactive connection.
Online Online identifies an active connection.
P
Password protection,
configuration
You can change the password for the user interface of the Gateway 400 in the
System/Password menu. Make sure that you always do this after you first
connect the Gateway 400 in order to prevent unauthorized access to the
Gateway 400. If you have forgotten your password, you can revert to the fac-
tory default settings of the user interface only by resetting the Gateway 400.
All custom settings will be lost in the process. To reset the Gateway 400, press
the Reset button for about 10 seconds (until the Power LED lights up in red
for the second time).
Phone switch Switching device for connecting multiple devices (such as telephones, fax
equipment, answering machines, etc.).
Port The term port designates a connection or an interface. A distinction is made
between a physical port (e.g., a USB port for a mass storage device) and a log-
ical port (such as port 80 for the Internet connection).
Port Forwarding Port forwarding enables computers within a local network to also operate
outside that network and thus be accessible to other external computers as
well. This is important, for example, to exchange data over the Internet or to
communicate with other computers while playing games over the network.
PPPoE Pass Through PPPoE (Point-to-Point-Protocol over Ethernet) Pass Through enables the rout-
er to be operated in transparent mode and an additional Internet connection
to be set up from the local network.
62


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for ZyXEL Gateway 400 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of ZyXEL Gateway 400 in the language / languages: English as an attachment in your email.

The manual is 1.91 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of ZyXEL Gateway 400

ZyXEL Gateway 400 Quick start guide - German - 16 pages

ZyXEL Gateway 400 User Manual - German - 95 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info