796886
39
Zoom out
Zoom in
Previous page
1/68
Next page
Configuration | Gateway 400 User Guide
39
5.8 System
This screen displays a summary of the system settings and version information of the Gateway 400.
5.8.1 Protocol Stack
The Protocol Stack Editor enables you to easily edit the current network setup. Even the IP address
of the Gateway 400 is defined here.
In the protocol stack editor, the following elements are provided for the configuration:
In order to ensure that the configuration is successful, the following information should be taken
into account:
At least one Default Gateway must be specified.
In addition, a Backup Gateway to be used when the Default Gateway is not available can be op-
tionally set.
If IPv6 is to be used, this must be configured in the properties of the PPPoE connection.
More than one Layer 2 can be used on a physical interface (for example, VLAN stacking or a VLAN
in a bridge). To do this, click the “+” symbol in the Layer 2 column to create multiple L2 interfac-
es.
Behind every IP termination, an Alias must be set. Only then can the interface be used by the ser-
vices of the device and a firewall configuration also be created.
If changes are made to the protocol stack editor, then any previously made settings at the fire-
wall will be disabled. In addition, it should be checked whether any configured services of the
device are affected by the changes.
Physical: In this column, you specify the physical interface. Select DSL, WANoE, UMTS or LAN
from the drop-down menu. More information can be found under Physical Set-
tings, page 40.
Attention
Do not delete the IP address of the Gateway 400 in the LAN configuration! The Gateway
400 would then no longer be accessible via the user interface.
You can restore access by resetting the device to the factory state; however, all configu-
rations will be lost in the process (see also Reset Device, page 43).
Drop-down lists allow you to add new interfaces
Removes the respective element
Adjust the parameters
Element unconfigured (red)
Element is not modified (yellow)
Element configured correctly (green)
To configure Q-in-Q (double tagged VLAN) or bridges, please increase the Layer 2 stack
level with the “+” symbol.
Note
It is recommended to first configure the network configuration and then configure the
services of the device in order to avoid duplicating the configuration effort.
39


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for ZyXEL Gateway 400 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of ZyXEL Gateway 400 in the language / languages: English as an attachment in your email.

The manual is 1.91 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of ZyXEL Gateway 400

ZyXEL Gateway 400 Quick start guide - German - 16 pages

ZyXEL Gateway 400 User Manual - German - 95 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info