796886
29
Zoom out
Zoom in
Previous page
1/68
Next page
Configuration | Gateway 400 User Guide
29
5.5.5 ISDN
This screen dialog allows you to define the connection type of the individual ISDN S0 interfaces. Click
on the pencil icon to edit the settings.
VoIP Account: Optionally, the ISDN interface may also be assigned a VoIP account. See "VoIP
Accounts" on page 27.
If a VoIP account is assigned, only this account is used for the ISDN interface.
If no VoIP account is assigned, the ISDN interface is not used, since no routing is
possible. Alternatively, the VoIP account can be assigned to the ISDN interface as
described in “Interface Mapping” on page 29.
Connection type: Here you can select the connection type to be used for the ISDN interface. This set-
ting depends on which connection types are supported by the ISDN hardware.
For a point-to-point connection, you can directly dial the extension (DID or DDI) by
adding the extension number to the main call number.
For a point-to-multipoint connection, a terminal device is assigned one or several
call numbers (Multiple Subscriber Number, MSN), typically up to the maximum
number of 10 per ISDN connection.
Bus Mode: point-to-point connections always require an extended passive bus.
Point-to-multipoint connections typically use a short passive bus. An extended pas-
sive bus is used if the point-to-multipoint connection covers a distance of more
than 200 meters. At distances of more than 500 meters, no more than one terminal
device may be connected. See "Installation diagram for S0 bus" on page 18.
Interface: In this drop-down list, you can select the ISDN interface of the Gateway 400.
Group membership: The group membership enables multiple ISDN lines to be combined into a
group.
Echo Canceller: VoIP transmissions can be subject to unwanted echo and feedback. In such cases,
echo cancellation may solve the problem.
Activate: Select the check box to enable this configuration.
Layer 2 permanently active: For ISDN connections, layer 2 is required for connection control. Switch-
ing the layer to “permanently active” prevents it from entering into power saving
mode. This adjustment may be necessary if you encounter problems with outgoing
calls (no ringback tone for outside line seizure).
Click Save to store the settings in the Gateway 400.
5.5.5.1 Interface Mapping
The left column contains the configured VoIP accounts. The individual rows represent the VoIP ac-
counts, and the columns represent the four available ISDN interfaces. The check boxes in this matrix
can be used for mapping VoIP accounts to ISDN interfaces.
If multiple VoIP accounts are to be mapped or assigned to one ISDN interface, the check box Allow
more than one VoIP account for each ISDN interface must be selected.
29


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for ZyXEL Gateway 400 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of ZyXEL Gateway 400 in the language / languages: English as an attachment in your email.

The manual is 1.91 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of ZyXEL Gateway 400

ZyXEL Gateway 400 Quick start guide - German - 16 pages

ZyXEL Gateway 400 User Manual - German - 95 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info