796886
26
Zoom out
Zoom in
Previous page
1/68
Next page
Gateway 400 User Guide | Configuration
26
5.5 Telephony
This screen dialog shows an overview of statuses of the telephony connections. The term VoIP
(Voice over Internet Protocol) always refers to Internet telephony.
Under Telephony, the status is shown as “Available” or “Not available”.
Under Internet Telephony, you can view further details for each connection. “VoIP Accounts” on
page 27 describes how to configure and edit the Provider, Call number, Name and Status.
The status should be displayed here as a green check mark , followed by information about the
time of activation.
If a red cross appears instead, first check whether the VoIP account was disabled as described in
the section “VoIP Accounts” on page 27. If all VoIP accounts are affected, check the DSL connection.
If the error occurs for individual VoIP accounts, ask your VoIP provider (Internet telephony provider)
to check the configuration of the “VoIP Accounts” on page 27 or the status of the VoIP account.
5.5.1 General
This screen dialog allows you to make various settings for the telephony mode.
Overlap Dialing
By default, SIP uses en-bloc dialing. This dialing method first collects all the digits of the number to
be dialed and then transmits the entire number en bloc. Alternatively, the Gateway 400 provides
the option of Overlap Dialing according to RFC 3578, which tries to accelerate connection setup by
attempting to dial partially entered, incomplete numbers while digits are being entered.
If the option Overlap Dialing is enabled, the additional option Enable fallback to normal dialing will
be available. This option can be used to temporarily enable en-bloc dialing if the connection setup
fails using overlap dialing.
Configuration of incoming VoIP calls
For incoming calls, some VoIP providers (Internet telephony providers) transmit the destination call
number in the “To-Header” line of the SIP protocol instead of the “Request-Line”.
With this option, you can ensure that the destination call number is analyzed correctly and forward-
ed in the Gateway 400 exactly as specified in the transmitted data.
International Call Prefix
If the VoIP account (see VoIP Accounts on page 27) was configured with the country code, the call
numbers will also be transmitted with the country code. Here you can select the Call Prefix to be
used for outgoing call numbers. Similarly, the string selected here is also expected as a prefix for in-
coming calls.
Number format of incoming calls
Under Number Format, you can select the format in which the call number is transmitted for incom-
ing SIP-to-ISDN connections:
Unknown The call number is transmitted 1:1 from SIP to ISDN
Subscriber Only the call number (without the area code) is transmitted
National Both the area code and the call number are transmitted
International The country code, the area code and the call number are transmitted
26


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for ZyXEL Gateway 400 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of ZyXEL Gateway 400 in the language / languages: English as an attachment in your email.

The manual is 1.91 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of ZyXEL Gateway 400

ZyXEL Gateway 400 Quick start guide - German - 16 pages

ZyXEL Gateway 400 User Manual - German - 95 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info