796886
10
Zoom out
Zoom in
Previous page
1/68
Next page
Gateway 400 User Guide | Before You Start
10
1.3 Safety Information
Do not open the housing.
Never install the device or insert or disconnect a cable connection during a thunderstorm.
The device is only intended for applications within a building.
The power outlet must be near the equipment and easily accessible.
Lay the cables so that no one can step on or trip over them.
Use a dry cloth to clean the housing.
Avoid direct contact with water. Never immerse the device in water.
Avoid direct sunlight.
Make sure that only terminals that provide TNV-1 voltage or are intended for operation with
TNV-1 circuits are connected to the ISDN interfaces.
RJ45 jacks are used for a number of different interfaces. There is therefore a risk of confusion.
The Gateway 400 features TNV interfaces (Telecommunications Network Voltage) for ISDN con-
nections and SELV interfaces (Safety Extra Low Voltage) for network connections. Make sure
that no TNV and SELV interfaces are connected with one another. SELV devices are not protected
against voltage spikes, which can lead to technical defects or hazards for users. In the event of
a mixup, the devices will not operate as intended.
The device is designed for use as a desktop unit.
However, it can also be mounted in a rack. Please refer to the installation instructions.
USB devices must only be connected with cables of no more than 3 meters (approx. 9 feet).
Cables to SELV interfaces must not exit the building.
Clock lines should only be connected at the remote end as described in the supplied documen-
tation.
The device is designed for use in office and residential areas.
1.4 Computer Settings
In order to enable your computer to automatically connect to the Gateway 400, please check your
LAN settings. The LAN connection on your computer must be set to Obtain an IP address au-
tomatically (DHCP).
Assigning an IP address ensures that network devices on the Internet or on a home network (local
IP network) can be properly addressed. This requires each IP address to be only assigned once. This
automatic assignment of IP addresses can be handled by the Gateway 400 with its built-in DHCP
server (recommended, default setting).
Attention
This is a Class A device. This device can cause radio interference in residential areas. In
such cases, the operator may be required to take appropriate counteractive measures.
Note
In a network, only one device can perform the service of a DHCP server.
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for ZyXEL Gateway 400 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of ZyXEL Gateway 400 in the language / languages: English as an attachment in your email.

The manual is 1.91 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of ZyXEL Gateway 400

ZyXEL Gateway 400 Quick start guide - German - 16 pages

ZyXEL Gateway 400 User Manual - German - 95 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info