679693
17
Zoom out
Zoom in
Previous page
1/300
Next page
Chapter 1 Introduction
AMG1312-T Series User’s Guide
17
1.6 Using the WPS Button
You can also use the WPS button to quickly set up a secure wireless connection between the
AMG1312-T Series and a WPS-compatible client by adding one device at a time.
To activate WPS:
1 Make sure the POWER LED is on and not blinking.
2 Press the WPS button for 1-5 seconds and release it. See below for WPS button location.
(WLAN)
Green On The wireless network is activated.
Blinking The AMG1312-T Series is communicating with wireless clients.
Off The wireless network is not activated.
(WPS)
Green On WPS is ready.
Blinking The AMG1312-T Series is setting up a WPS connection.
Off WPS is disabled or has failed.
(DSL)
Green On The DSL line is up.
Blinking The AMG1312-T Series is initializing the DSL line.
Off The DSL line is down.
(INTERNET)
Green On The AMG1312-T Series has an IP connection but no traffic.
Your device has a WAN IP address (either static or assigned by a
DHCP server), PPP negotiation was successfully completed (if
used) and the DSL connection is up.
Blinking The AMG1312-T Series is sending or receiving IP traffic.
Red On The AMG1312-T Series attempted to make an IP connection but
failed. Possible causes are no response from a DHCP server, no
PPPoE response, PPPoE authentication failed.
Off The AMG1312-T Series does not have an IP connection.
USB
Green On The AMG1312-T Series recognizes a USB connection through the
USB slot.
Blinking The AMG1312-T Series is sending/receiving data to /from the USB
device connected to it.
Off The AMG1312-T Series does not detect a USB connection through
the USB slot.
Table 1 LED Descriptions (continued)
LED COLOR STATUS DESCRIPTION
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for ZyXEL AMG1312-T series at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of ZyXEL AMG1312-T series in the language / languages: English as an attachment in your email.

The manual is 6,68 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info