679704
300
Zoom out
Zoom in
Previous page
1/320
Next page
Appendix E IPv6
AMG1302/AMG1202-TSeries User’s Guide
300
Transition Techniques
IPv6 Over IPv4 Tunnelling
To route traffic between two IPv6 networks over an IPv4 network, an IPv6 over IPv4 tunnel has to
be used.
On the AMG1302/AMG1202-TSeries, you can either set up a configured tunnel or an automatic 6to4
tunnel. The following describes each method.
Configured Tunnel
A configured tunnel is a point-to-point tunnelling mechanism that encapsulates an IPv6 address
with an IPv4 address. Routers (A and B) on both IPv6 networks (1 and 2) each must have an
interface that connects to the IPv4 network (with an IPv4 address). This allows the router to send
and receive IPv6 data over the IPv4 network.
In this case, you must specify Bs public IPv4 address on A (similarly, specify A’s public IPv4
address on B) in order for packets to arrive at the intended destination through the IPv4 network.
Figure 178 Configured Tunnel Example
6to4 Tunnel
A 6to4 tunnel is an automatic tunnelling mechanism that provides connection between IPv6
networks across an IPv4 network. To transmit IPv6 packets over an IPv4 network, the IPv6 packets
are encapsulated inside IPv4 packets.
The following figure shows a network example.
Figure 179 6to4 Relay Router Network Example
In a 6to4 tunnel, 6to4 routers (A and B in the example network) forward these packets between
IPv6 networks (1 and 2) over the IPv4 Internet. A 6to4 relay router (C) connects to both an IPv6
300


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for ZyXEL AMG1302-T series at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of ZyXEL AMG1302-T series in the language / languages: English as an attachment in your email.

The manual is 6,43 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info