679704
124
Zoom out
Zoom in
Previous page
1/320
Next page
Chapter 8 Home Networking
AMG1302/AMG1202-TSeries User’s Guide
124
The following table describes the fields in this screen.
Table 30 Network Setting > Home Networking > LAN Setup
LABEL DESCRIPTION
LAN IP Setup
IP Address Enter the LAN IP address you want to assign to your AMG1302/AMG1202-TSeries in
dotted decimal notation, for example, 192.168.1.1 (factory default).
Subnet Mask Type the subnet mask of your network in dotted decimal notation, for example
255.255.255.0 (factory default). Your AMG1302/AMG1202-TSeries automatically
computes the subnet mask based on the IP Address you enter, so do not change this
field unless you are instructed to do so.
Dynamic Route
RIP (Routing Information Protocol) allows a router to exchange routing information
with other routers. Select the RIP version from RIP1 and RIP2.
Direction
Use this field to control how much routing information the VDSL Router sends and
receives on the subnet. Select the RIP Direction from None, Both, IN Only and
OUT Only.
Multicast IGMP (Internet Group Multicast Protocol) is a network-layer protocol used to establish
membership in a multicast group. The AMG1302/AMG1202-TSeries supports IGMP
v1/IGMP v2/IGMP v3. Select None to disable it.
IGMP Snooping Select Enabled to activate IGMP Snooping. This allows the AMG1302/AMG1202-
TSeries to passively learn memberships in multicast groups. Otherwise, select
Disabled to deactivate it.
DHCP Server State
DHCP If set to Enable, your AMG1302/AMG1202-TSeries can assign IP addresses, an IP
default gateway and DNS servers to Windows 95, Windows NT and other systems that
support the DHCP client.
If set to Disable, the DHCP server will be disabled.
If set to DHCP Relay, the AMG1302/AMG1202-TSeries acts as a surrogate DHCP
server and relays DHCP requests and responses between the remote server and the
clients. Enter the IP address of the actual, remote DHCP server in the Remote DHCP
Server field in this case.
When DHCP is used, the following items need to be set:
IP Addressing Values
Beginning IP Address This field specifies the first of the contiguous addresses in the IP address pool.
Pool Size This field specifies the size, or count of the IP address pool.
DHCP Server Lease Time
Lease Time This field specifies the lease time in seconds of an IP address assigned by the DHCP
server.
DNS Values
DNS
Select Dynamic to have the AMG1302/AMG1202-TSeries pass a DNS (Domain Name
System) server IP address to the DHCP clients.
Select Static and enter the DNS server IP address(es) in the fields below, if you know
the IP address.
DNS Server 1/2 Enter the IP address of your primary/secondary DNS server.
Apply Click this to save your changes.
Cancel Click this to restore your previously saved settings.
Advanced Setup Click this to display the Advanced LAN Setup screen and edit more details of your
LAN setup.
124


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for ZyXEL AMG1302-T series at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of ZyXEL AMG1302-T series in the language / languages: English as an attachment in your email.

The manual is 6,43 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info