679704

ZyXEL AMG1302-T series Manual

107
Zoom out
Zoom in
Previous page
1/320
Next page
Chapter 7 Wireless LAN
AMG1302/AMG1202-TSeries User’s Guide
107
7.10 Wireless LAN Technical Reference
This section discusses wireless LANs in depth. For more information, see the appendix.
7.10.1 Wireless Network Overview
Wireless networks consist of wireless clients, access points and bridges.
• A wireless client is a radio connected to a user’s computer.
• An access point is a radio with a wired connection to a network, which can connect with
numerous wireless clients and let them access the network.
• A bridge is a radio that relays communications between access points and wireless clients,
extending a network’s range.
Traditionally, a wireless network operates in one of two ways.
802.11 Mode Select 802.11b Only to allow only IEEE 802.11b compliant WLAN devices to associate
with the AMG1302/AMG1202-TSeries.
Select 802.11g Only to allow only IEEE 802.11g compliant WLAN devices to associate
with the AMG1302/AMG1202-TSeries.
Select 802.11b+g to allow either IEEE 802.11b or IEEE 802.11g compliant WLAN
devices to associate with the AMG1302/AMG1202-TSeries. The transmission rate of your
AMG1302/AMG1202-TSeries might be reduced.
Select 802.11n to allow only IEEE 802.11n compliant WLAN devices to associate with the
AMG1302/AMG1202-TSeries.
Select 802.11g+n to allow either IEEE 802.11g or IEEE 802.11n compliant WLAN
devices to associate with the AMG1302/AMG1202-TSeries. The transmission rate of your
AMG1302/AMG1202-TSeries might be reduced.
Select 802.11b+g+n to allow IEEE 802.11b, IEEE 802.11g or IEEE802.11n compliant
WLAN devices to associate with the AMG1302/AMG1202-TSeries. The transmission rate of
your AMG1302/AMG1202-TSeries might be reduced.
Channel Width Select whether the AMG1302/AMG1202-TSeries uses a wireless channel width of 20MHz
or Auto. If Auto is selected, the AMG1302/AMG1202-TSeries will use 40MHz if it is
supported.
A standard 20MHz channel offers transfer speeds of up to 150Mbps whereas a 40MHz
channel uses two standard channels and offers speeds of up to 300 Mbps.
40MHz (channel bonding or dual channel) bonds two adjacent radio channels to increase
throughput. The wireless clients must also support 40 MHz. It is often better to use the 20
MHz setting in a location where the environment hinders the wireless signal.
Select 20MHz if you want to lessen radio interference with other wireless devices in your
neighborhood or the wireless clients do not support channel bonding.
This field is available only when you set the 802.11 Mode to 802.11n or 802.11b+g+n
in the Advanced Setup screen.
Apply Click this to save your changes.
Cancel Click this to restore your previously saved settings.
Table 27 Network Setting > Wireless> Advanced
LABEL DESCRIPTION
… 107 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for ZyXEL AMG1302-T series at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of ZyXEL AMG1302-T series in the language / languages: English as an attachment in your email.

The manual is 6,43 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info