679704

ZyXEL AMG1302-T series Manual

84
Zoom out
Zoom in
Previous page
1/320
Next page
Chapter 6 Broadband
AMG1302/AMG1202-TSeries User’s Guide
84
Node Name Enter a unique, descriptive name of up to 13 ASCII characters for this connection.
Mode Select Router from the drop-down list box if your ISP allows multiple computers to share
an Internet account.
If you select Bridge, the AMG1302/AMG1202-TSeries will forward any packet that it does
not route to this remote node; otherwise, the packets are discarded.
Encapsulation Select the method of encapsulation used by your ISP from the drop-down list box.
Choices vary depending on the mode you select in the Mode field.
If you select Router in the Mode field, select PPPoA, RFC 1483, ENET ENCAP or
PPPoE.
If you select Bridge in the Mode field, method of encapsulation is not available.
Multiplex Select the method of multiplexing used by your ISP from the drop-down list. Choices are
VC or LLC.
By prior agreement, a protocol is assigned a specific virtual circuit, for example, VC1 will
carry IP. If you select VC, specify separate VPI and VCI numbers for each protocol.
For LLC-based multiplexing or PPP encapsulation, one VC carries multiple protocols with
protocol identifying information being contained in each packet header. In this case, only
one set of VPI and VCI numbers need be specified for all protocols.
IPv6/IPv4 Dual
Stack
If you select Enable, the AMG1302/AMG1202-TSeries can connect to IPv4 and IPv6
networks and choose the protocol for applications according to the address type. If you
select Disable, the AMG1302/AMG1202-TSeries will operate in IPv4 mode.
VPI The valid range for the VPI is 0 to 255. Enter the VPI assigned to you.
VCI The valid range for the VCI is 32 to 65535 (0 to 31 is reserved for local management of
ATM traffic). Enter the VCI assigned to you.
IP Address This option is available if you select Router in the Mode field.
A static IP address is a fixed IP that your ISP gives you. A dynamic IP address is not fixed;
the ISP assigns you a different one each time you connect to the Internet.
If you use the encapsulation type except RFC 1483, select Obtain an IP Address
Automatically when you have a dynamic IP address; otherwise select Static IP
Address and type your ISP assigned IP address in the IP Address field below.
If you use RFC 1483, enter the IP address given by your ISP in the IP Address field.
Subnet Mask Enter a subnet mask in dotted decimal notation.
Gateway IP
Address
Specify a gateway IP address (supplied by your ISP).
Primary DNS Enter the primary DNS server’s address for the AMG1302/AMG1202-TSeries.
Secondary
DNS
Enter the secondary DNS server’s address for the AMG1302/AMG1202-TSeries.
NAT SUA Only is available only when you select Router in the Mode field.
Select SUA Only if you have one public IP address and want to use NAT. Otherwise, select
None to disable NAT.
Apply Click this to save your changes.
Cancel Click this to return to the previous screen without saving.
Advanced Setup Click this to display more fields in this screen to configure more details of your WAN
settings.
Table 14 Network Setting > Broadband > More Connections: Edit (continued)
LABEL DESCRIPTION
… 84 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for ZyXEL AMG1302-T series at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of ZyXEL AMG1302-T series in the language / languages: English as an attachment in your email.

The manual is 6,43 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info