679704
70
Zoom out
Zoom in
Previous page
1/320
Next page
Chapter 5 Connection Status and System Info Screens
AMG1302/AMG1202-TSeries User’s Guide
70
DHCP This field displays what DHCP services the AMG1302/AMG1202-TSeries is providing to
the LAN. Choices are:
Server - The AMG1302/AMG1202-TSeries is a DHCP server in the LAN. It assigns IP
addresses to other computers in the LAN.
Relay - The AMG1302/AMG1202-TSeries acts as a surrogate DHCP server and relays
DHCP requests and responses between the remote server and the clients.
None - The AMG1302/AMG1202-TSeries is not providing any DHCP services to the LAN.
IPv6 LAN DNS1/
2
This is the first/second DNS server IPv6 address the AMG1302/AMG1202-TSeries
passes to the DHCP clients.
WLAN Information
Status This displays whether wireless LAN is turned on or off.
SSID This is the descriptive name used to identify the AMG1302/AMG1202-TSeries in the
wireless LAN.
Channel This is the channel number used by the AMG1302/AMG1202-TSeries now.
Security Mode This displays the type of security the AMG1302/AMG1202-TSeries is using in the
wireless LAN.
WPS Configured displays when the WPS security settings have been configured and wireless
clients can connect with the device through WPS. Unconfigured displays when the
device has not been configured and wireless clients can’t establish a link with the device
through WPS.
Scheduling This displays whether WLAN scheduling is activated.
WiFi MAC This is the MAC (Media Access Control) of the WiFi interface.
Security
Firewall
This displays whether or not the AMG1302/AMG1202-TSeries’s firewall is activated.
Click this to go to the screen where you can change it.
Interface Status
Interface This column displays each interface the AMG1302/AMG1202-TSeries has.
Status This field indicates whether or not the AMG1302/AMG1202-TSeries is using the
interface.
For the DSL interface, this field displays Down (line is down), Up (line is up or
connected), Initializing (line is initializing), Establishing Link (line is establishing a
link) if you're using Ethernet encapsulation and Down (line is down), Up (line is up or
connected), Idle (line (ppp) idle), Dial (starting to trigger a call) and Drop (dropping a
call) if you're using PPPoE encapsulation.
For the LAN interface, this field displays Up when the AMG1302/AMG1202-TSeries is
connected through an Ethernet cable to a computer or a HUB. It displays Down when
the AMG1302/AMG1202-TSeries’s Ethernet port is disconnected.
For the WLAN interface, it displays Active when WLAN is enabled or InActive when
WLAN is disabled.
Rate For the LAN interface, this displays the port speed.
For the WAN interface, this displays the DSL link rate downstream and upstream.
For the DSL interface, it displays the downstream and upstream transmission rate.
For the WLAN interface, it displays the maximum transmission rate when WLAN is
enabled or N/A when WLAN is disabled.
System Status
DSL Up Time This field displays how long the DSL connection has been active.
LABEL DESCRIPTION
70


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for ZyXEL AMG1302-T series at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of ZyXEL AMG1302-T series in the language / languages: English as an attachment in your email.

The manual is 6,43 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info