729915

ZyXEL AMG1001-T Series Manual

78
Zoom out
Zoom in
Previous page
1/183
Next page
Chapter 11 Quality of Service (QoS)
AMG1001-T/AMG1011-T Series User’s Guide
78
11.2.1 The QoS Settings Summary Screen
Use this screen to display a summary of rules and actions configured for the AMG1001-T/AMG1011-
T. In the Advanced > QoS screen, click the QoS Settings Summary button to open the following
screen.
Figure 42 Advanced Setup > QoS > QoS Settings Summary
The following table describes the labels in this screen.
IP Precedence
Remarking
Select from 0 to 7 to re-assign IP precedence to matched traffic. Zero is the lowest priority
and seven is the highest.
Type of Service
Remarking
Select a type of service to re-assign the priority level to matched traffic.
Available options are: Normal service, Minimize delay, Maximize throughput,
Maximize reliability and Minimize monetary cost.
DSCP
Remarking
Specify a DSCP number between 0 and 63 to re-assign the priority level to matched traffic.
802.1p
Remarking
Select a priority level (0 to 7) to re-assign the priority level to matched traffic.
Queue # Specify a Low, Medium, High or Highest queue tag to matched traffic. Traffic assigned to
a higher queue gets through faster while traffic in lower queues is dropped when there is
network congestion.
ADD Click this to add the rule.
DELETE Click this to remove the rule.
CANCEL Click this to restore previously saved settings.
Table 27 Advanced Setup > QoS
LABEL DESCRIPTION
Table 28 Advanced Setup > QoS > QoS Settings Summary
LABEL DESCRIPTION
Rules
# This is the rule’s index number.
Active This shows whether the rule is enabled or disabled.
Physical Ports This is the physical port associated with the rule.
Destination MAC
and IP/Mask Port
Ranges
This is the port range for destination MAC address and IP address.
Source MAC and
IP/Mask Port
Ranges
This is the port range for source MAC address and IP address.
Protocol ID This is the protocol ID associated with the rule.
… 78 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for ZyXEL AMG1001-T Series at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of ZyXEL AMG1001-T Series in the language / languages: English as an attachment in your email.

The manual is 5,38 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info