729915
28
Zoom out
Zoom in
Previous page
1/183
Next page
Chapter 3 Device Information
AMG1001-T/AMG1011-T Series User’s Guide
28
The following table describes the fields in this screen.
Table 3 Status > Device Information
LABEL DESCRIPTION
Device Information
Firmware
Version
This is the current version of the firmware inside the device. It also shows the date the
firmware version was created.
MAC Address This is the MAC (Media Access Control) or Ethernet address unique to your AMG1001-T/
AMG1011-T.
LAN
IP Address This is the current IP address of the AMG1001-T/AMG1011-T in the LAN.
Subnet Mask This is the current subnet mask in the LAN.
DHCP Server This field displays what DHCP services the AMG1001-T/AMG1011-T is providing to the
LAN. Choices are:
Enabled - The AMG1001-T/AMG1011-T is a DHCP server in the LAN. It can assign IP
addresses to other computers in the LAN.
Relay - The AMG1001-T/AMG1011-T acts as a surrogate DHCP server and relays DHCP
requests and responses between the remote server and the clients.
Disabled - The AMG1001-T/AMG1011-T is not providing any DHCP services to the LAN.
WAN
Virtual Circuit Use the drop-down list box to select a virtual circuit. The fields below display
information about the virtual circuit you choose.
Status This is the status of the WAN connection.
Connection
Type
This is the connection type supported by your ISP.
IP Address This is the current IP address of the AMG1001-T/AMG1011-T in the WAN, if applicable.
Subnet Mask This is the current subnet mask in the WAN, if applicable.
Default
Gateway
This is the IP address of the default gateway, if applicable.
DNS Server
This is the current DNS server in the WAN, if applicable.
NAT
This field displays whether NAT is activated.
ADSL
ADSL Firmware
Version
This is the current version of the device’s DSL modem code.
Line State This is the status of your ADSL connection.
Modulation This is the ADSL modulation of your AMG1001-T/AMG1011-T.
Annex Mode This is the annex mode of your AMG1001-T/AMG1011-T.
Downstream This is the downstream speed of your ZyXEL Device.
Upstream This is the upstream speed of your ZyXEL Device.
SNR Margin This is the Signal to Noise Ratio (SNR) margin. SNR represents the ratio of the signal
received to the system’s noise threshold. The higher the SNR number, the better the line
quality.
Line Attenuation This is the difference (in dB) between the power received at the near-end and that
transmitted from the far-end.
Data Rate This is speed of data transfer on your AMG1001-T/AMG1011-T.
28


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for ZyXEL AMG1001-T Series at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of ZyXEL AMG1001-T Series in the language / languages: English as an attachment in your email.

The manual is 5,38 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info