607212

ZyXEL AG-225H v2 Manual

60
Zoom out
Zoom in
Previous page
1/102
Next page
ZyXEL AG-225H v2 User’s Guide
60 Chapter 5 Access Point Mode Configuration
The following table describes the labels in this screen.
Table 17 Access Point Mode: Configuration
LABEL DESCRIPTION
Wireless Settings
SSID The SSID identifies the wireless network to which a wireless station is associated.
Wireless stations associating with the access point (the AG-225H v2) must have
the same SSID.
Enter a descriptive name (up to 32 printable 7-bit ASCII characters) for the
wireless LAN.
Hide SSID Select this check box to hide the SSID so an intruder cannot obtain the SSID
through scanning using a site survey tool.
Wireless Mode Set this field to allow wireless stations using different wireless modes to connect to
the AP (the AG-225H v2).
Select 802.11b + 802.11g (default) to allow wireless stations using both IEEE
802.11b and IEEE 802.11g modes to connect to the AP.
Select 802.11b to allow only wireless clients using IEEE 802.11b mode to connect
to the AP.
Select 802.11g to allow only wireless clients using IEEE 802.11g mode to connect
to the AP.
Select 802.11a to allow only wireless clients using IEEE 802.11a mode to connect
to the AP.
Channel Set the operating frequency/channel depending on your geographical region.
Output Power Set this field if you need to conserve power consumption (especially for notebook
computers). This control changes the strength of the AG-225H v2’s antenna gain
or transmission power. Antenna gain, measured in dBm (decibel relative units
compared to milliwatts), is the increase in coverage. Higher antenna gain improves
the range of the signal for better communications.
Select High to set the AG-225H v2’s antenna to transmit at 17-dBm.
Select Medium-High to set the AG-225H v2’s antenna to transmit at 15-dBm.
Select Medium-Low to set the AG-225H v2’s antenna to transmit at 13-dBm.
Select Low to set the AG-225H v2’s antenna to transmit at 11-dBm. This allows for
the least power consumption.
Security Settings
WEP Select 64 Bits, 128 Bits or 256 Bits to activate WEP encryption and then fill in the
related fields.
Select Disable to deactivate the WEP encryption.
Authentication
Type
Select an authentication method. Choices are Shared and Open.
Refer to Section 3.2.3.1.2 on page 35 for more information.
Pass Phrase Enter a passphrase of up to 63 case-sensitive printable characters. As you enter
the passphrase, the AG-225H v2 automatically generates four different WEP key
and displays the first in the key field below. Refer to Section 3.2.3.1 on page 35 for
more information.
At the time of writing, you cannot use passphrase to generate 256-bit WEP keys.
Transmit Key Select a default WEP key to use for data encryption. The key displays in the field
below.
… 60 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for ZyXEL AG-225H v2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of ZyXEL AG-225H v2 in the language / languages: English as an attachment in your email.

The manual is 2,84 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info