Manual Zwilling Hand Blender (page 31 of 56) (English, German)

785965

Zoom out

Zoom in

1/56

Operating the hand blender

4.3 Removing the blender attachment

CAUTION!

Risk of injury and property damage due to rotat-

ing blade! The appliance continues to run briey

after it has been switched off.

Do not remove the blender attachment from

the working container until the appliance has

come to a standstill.

1. Unplug the power plug from the socket.

2. Twist the blender attachment off of the drive

unit (Fig. 7).

4.4 Cleaning the hand blender

WARNING!

Risk of injury and property damage due to incor-

rect cleaning:

Switch off the appliance and unplug the

power plug from the socket before you re-

move the blender attachment and clean the

appliance.

Never immerse the drive unit in water or oth-

er liquids. Do not clean the drive unit under

running water.

Only clean the drive unit and power cable

with a soft, slightly moistened cloth.

Never completely immerse the blender at-

tachment in water or other liquids. This is to

prevent water from penetrating the upper part

(Fig. 8).

In the event that water has penetrated the

blender attachment, let the attachment dry

thoroughly and only use it again if it is com-

pletely dry.

Do not use any hard cleaning utensils, such as

steel wool, or any sharp or corrosive cleaning

agents to clean the appliance.

Do not touch the blades (Fig. 8).

Fig. 7: Removing the blender

attachment

Fig. 8: Caution: Blades and

moisture

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Zwilling Hand Blender in the language / languages: English, German as an attachment in your email.

The manual is 7.56 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Zwilling Hand Blender Manual

Product: