792479
3
Zoom out
Zoom in
Previous page
1/4
Next page
Most SoundBase users teach the
SoundBase to respond to their preferred
remote control using the SounBase built-in
“learning” function. Should this approach not
work with your preferred remote control, there
is an alternate method that can allow your
preferred remote to control the sound level
heard from the SoundBase.
To use this method, your preferred remote
control needs an Aux or Audio device button
in addition to device buttons for the TV and
set top box. This method cannot be used if
your preferred remote control controls only
two devices (Set Top Box and TV). You will
also need the User Manual for your specic
Cable or Satellite remote control, along
with the “device brand and code” list for
your remote control. This list may be a
separate document from the remote
control User Manual.
Using the PS numbers 1 through 6, you set
the SoundBase to respond to the volume/
mute/power infrared commands of a specic
TV or audio system manufacturer. In most
cases, you need to choose a different brand
than your TV. Choosing a brand that is
different from your TV eliminates the chance
that the TV’s internal speakers will start
playing along with the SoundBase. Sony is a
good choice from the PS menu for any brand
of TV that is not Sony. Most cable or satellite
remote controls can be adjusted to control a
SoundBase set to “Sony” in the PS menu. If
you have a Sony TV that will not allow you to
turn off the internal speakers, you will have to
choose a different brand from the PS menu
numbers 1 through 6.
Once you have chosen a brand from the
SoundBase PS menu, you need to adjust
the setting on your cable or satellite remote
Using the SoundBase remote control emulation modes
PS 1 through PS 6:
so its Volume buttons adjust that same
brand of Aux or Audio device. There are two
adjustments you may need to make on the
cable or satellite remote.
Cable/Sat remote adjustment 1: The
volume buttons on a cable or satellite
remote are typically locked adjust on the
TV’s internal speakers. Even if you press the
“Cable” button on your remote, the volume
buttons will still send out volume commands
for your TV, not the cable box. You need to
unlock the Cable/Sat remote volume buttons
according to the cable or satellite remote
control’s instructions. Once unlocked,
pressing Aux on the Cable/Sat remote
will then cause the volume buttons on the
Cable/Sat remote to control whatever brand
of device is set on the Aux button.
Cable/Sat remote adjustment 2: The
cable/satellite remote instructions will also tell
you how to set the “AUX” or “AUDIO” button
to the brand you chose on the SoundBase
PS menu. The instructions should list a few
numbers that let you control a device that
responds to Sony codes, for instance.
Try the different “number code” options
listed until you nd one that controls the
SoundBase. If you cannot nd a code that
controls the SoundBase, you can set the
SoundBase to one of the other four brands
available and search for a compatible code
for that brand.
Once you nd a code number that controls
the SoundBase, you can then “lock” the
cable or satellite remote volume buttons to
adjust only the Aux or Audio device and not
the TV. Once locked, the volume buttons
will always control the SoundBase, even
if a TV/Cable/Satellite/DVD button on the
Cable/Satellite remote control is pressed.
3


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Zvox SoundBase 770 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Zvox SoundBase 770 in the language / languages: English as an attachment in your email.

The manual is 0.26 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Zvox SoundBase 770

Zvox SoundBase 770 Additional guide - English - 1 pages

Zvox SoundBase 770 Quick start guide - English - 2 pages

Zvox SoundBase 770 User Manual - English - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info