792486
6
Zoom out
Zoom in
Previous page
1/7
Next page
1. Speaker Placement
You can place the soundbar on any at, stable surface near your TV.
There are three general placement options, illustrated above:
Face Front You can place the soundbar on a at surface so it faces forward. This
placement is ideal for a shelf below, above or near the television.
Face Up You can place the soundbar facing up—often in front of the television. The
bottom of the soundbar should face the listening area. Check to ensure
the soundbar does not block the television infrared remote sensor. There
should be no shelf or at surface immediately above the soundbar in this
conguration.
Wall Mount The soundbar has two sturdy keyhole-shaped hanger mounts on the back
panel. You can hang the soundbar on two screwheads that are securely
installed in a wall or other vertical surface.
If you have a powered subwoofer you wish to use with this soundbar, the subwoofer
connection guide is located on the last panel of this document.
Consider the nish of the surface that will support the soundbar. It is the soundbar owner's
responsibility to insure that a surface nish that contacts the soundbar is protected,
should this be a concern of the soundbar owner. The contact area on the soundbar is
made of inert synthetic materials that typically do not react with furniture or wall nishes. But
any wall or surface nish can be altered by having any heavy object resting on it for a long
period of time. Place an appropriate barrier between any surface and the soundbar if you
are concerned about the nish of the supporting surface.
A safe, secure installation is the soundbar owner’s responsibility.
Use an unswitched AC outlet to provide power to the soundbar. With the soundbar's Auto
Standby feature turned on, the soundbar enters its low-power draw standby state after 20 to
30 minutes of inactivity. A soundbar uses less than 0.5 watt in Standby. Using a switched AC
outlet to cut off AC power to a soundbar system is not recommended. It delays subsequent
turn-on.
Do not place any objects on top of a soundbar.
2. Connect Your TV's Audio Output to the Soundbar
All current TVs have an audio output. It is likely that one of the cables provided with the
soundbar can be used to connect the TV audio output to an input on the soundbar. DO NOT
disconnect any video program source connected to your TV (like a cable or satellite set top box,
DVD/Bluray or similar).
2
Connect the
Soundbar
to your TV.
3
Learn the
features of the
Soundbar.
4
“Teach” the
Soundbar your
preferred remote.
1
Place or
hang the
Soundbar.
Face UpFace Front Wall Mount
Optical Digital Audio Output Jack (see above image)
Most HDTVs have an optical digital audio output jack. Use the provided optical cable to connect
the TV’s output jack to optical input 1 on the soundbar.
Simple Setup Just Four Steps
DIGITAL
AUDIO
OUT
HDMI 1 HDMI 2
VIDEO
Optical Digital
Audio Input
TV
Optical
Output
Optical Cable
Soundbar
Input
Panel
4b. End Panel Controls on the Soundbar
On the viewer’s right end of the soundbar are four buttons.
A) POWER button:
This button turns the soundbar “ON” if it is in Standby. If this button is pressed briey while the
soundbar is “ON”, it will mute and unmute the soundbar. To turn off the soundbar, press and
hold down this button for about ve seconds.
B) Volume Up/Down rocker button
Adjusts volume up and down. Pressing either side of this button will “unmute” the speaker if it is
muted.
C) Input button:
A brief press and release of the INPUT button selects the next input in sequence.
5. Tonal Prole Setting
The soundbar has three selectable tonal proles that allow it to better match the acoustics of its
room position. Use the soundbar's PS menu feature to choose one of these three settings.
Face Front ........ PS16 - on a at surface, facing front.
Face Up ............ PS17 - on a at surface, facing up.
Wall Mount ....... PS18 - on a vertical surface, facing into the room.
The default setting for the soundbar is Face Front.
If your soundbar’s position is Face Up or Wall Mount, you should select PS17 or PS18 from the
PS menu.
PS Menu: You adjust the PS Menu setting by rst pressing down on two buttons on the end
panel of the soundbar: Power ( ) and Volume Up (+). After about ve to seven seconds you
should see PS start ashing on the soundbar's display. The rst time you bring up the PS menu,
it should show “PS 0”.
Once you see the PS display, release the buttons. Then press and release the Volume Up button
to increase the PS number. Continue pressing and releasing the Volume Up button until you
reach the setting you want: PS16, PS17 or PS18.
If your home TV system does not match the descriptions in this
guide, don’t hesitate to send an inquiry to info@zvoxaudio.com
or call ZVOX Audio at (866) 367-9869. Please provide your TV
brand and model number. A ZVOX Audio representative should be
available (Eastern Time Zone) 9:30 AM to 7:30 PM Monday through
Friday and 10:30 AM to 5:30 PM on Saturday.
A
B
C
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Zvox SB400 Soundbar at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Zvox SB400 Soundbar in the language / languages: English as an attachment in your email.

The manual is 2.32 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Zvox SB400 Soundbar

Zvox SB400 Soundbar Additional guide - English - 1 pages

Zvox SB400 Soundbar Additional guide - English - 1 pages

Zvox SB400 Soundbar Additional guide - English - 4 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info