792422
6
Zoom out
Zoom in
Previous page
1/8
Next page
6 ZVOX AccuVoice TV Speaker | Setup & Operation
Surround Settings
There are three SURROUND levels:
Surround One (“Sd 1”) has low virtual surround
effect and strong vocals. Use this setting if vocal
clarity is important to you.
Surround Two (“Sd 2”) has moderate virtual
surround effect and moderate vocals. This is the
recommended setting for general TV programs.
Surround Three (“Sd 3”) has strong virtual
surround effect and moderate vocals. Many
people prefer this setting when watching movies.
Controlling the AccuVoice TV Speaker With Another Remote
The AccuVoice TV speaker can learn to respond to your preferred TV remote
for Volume, Mute and Power. Visit www.zvoxaudio.com to read or download
instructions for this feature.
The supplied ZVOX remote controls all functions of the ZVOX speaker, even if
another remote is also used to control volume on the ZVOX speaker.
AccuVoice
Press the AccuVoice button to set the AccuVoice function. Additional
presses of the AccuVoice button allow you to set Increased levels of voice
enhancement. There are two levels, AC 1 and AC 2. The setting you select
remains the default AccuVoice setting until you decide to change it.
On the viewer’s right end of the ZVOX speaker are four buttons.
A) POWER button:
This button turns the ZVOX speaker “ON” if it is in Standby. If this button is
pressed briey while the ZVOX speaker is “ON”, it will mute and unmute the
sound. To turn off the ZVOX speaker, press and hold down this button for about
ve seconds.
B) Volume Up/Down rocker button
Adjusts volume up and down. Pressing either side of this button will “unmute” the
ZVOX speaker if it is muted.
C) Input button:
A brief press of the INPUT button changes the input.
End Panel Controls on the
AccuVoice TV Speaker
OR
Other Settings Button
The Other Settings button allows Bass and Treble adjustment and turns Output
Leveling On and Off.
1) Bass Adjustment: The rst press of the Other Settings button displays
the current Bass setting. The range of bass adjustment goes from LO 4 to
LO-6 (This display is shorthand for Lows plus 4 and Lows minus 6). Use the
volume buttons to adjust the bass output across this range. Then wait for the
adjustment display to turn off.
2) Treble Adjustment: A second press of the Other Settings button displays
the current Treble setting. The range of treble adjustment is HI 4 to HI-4. That
is short hand for Highs plus 4 and Highs minus 4. Use the volume buttons to
adjust the bass output across this range. Then wait for the adjustment display
to turn off.
3) Output Leveling: A third press of the Other Settings button displays the
Output Leveling feature. The display will be either OL (Output Leveling engaged)
or noOL (Output Leveling off). Use the volume buttons to toggle the Output
Leveling feature on or off. Then wait for the adjustment display to turn off.
When engaged, Output Leveling prevents large swings in volume. It also reduces
volume differences between TV channels on cable or satellite systems.
A fourth press of the Other Settings button returns you to the current volume
setting and exits Other Settings adjustment.
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Zvox AccuVoice AV200 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Zvox AccuVoice AV200 in the language / languages: English as an attachment in your email.

The manual is 1.26 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Zvox AccuVoice AV200

Zvox AccuVoice AV200 Additional guide - English - 1 pages

Zvox AccuVoice AV200 User Manual - English - 2 pages

Zvox AccuVoice AV200 User Manual - Dutch - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info