792472
3
Zoom out
Zoom in
Previous page
1/5
Next page
AccuVoice AV100 TV Speaker
DIGITAL
AUDIO
OUT
HDMI 1 HDMI 2
VIDEO
1 ZVOX AV100 | Quick Setup Guide ZVOX AV100 | Connect AV100 2
Quick Setup Guide
(This quick guide is valid for an optical digital audio connection from your TV to the AccuVoice TV Speaker. This is the most common audio output on TVs.)
1 Place The ZVOX Speaker
NOTE: For brevity, the ZVOX AccuVoice TV
Speaker AV100 is often referred to as the
“ZVOX speaker” or “AV100” in this User
Manual.
You can place the ZVOX speaker anywhere in
front of your TV. It can also be placed on any
level surface near the TV – above, below or to
the left or right. It doesn’t have to be centered
in front of the TV. The ZVOX speaker performs
best if it faces the people watching the TV.
2 Connect Power Cord
to the ZVOX Speaker
Connect the power cord to the power
jack on the back.
Then connect the AC plug into an
AC power receptacle. The AV100 will
then power on and the blue light on
the front of the speaker will blink four
times to indicate this.
3 Connect the Optical Signal Cable
Most TVs have an optical digital output jack (sometimes called
“TOSLINK”) on the back panel. The supplied optical cable has
a square-like end which plugs into the TV and a round end
which goes into the ZVOX AV100. The optical cable might, or
might not, have small clear plastic covers protecting the metal
tips. Simply remove the covers before connecting the cable.
NOTE 1: The optical jack on your TV is not perfectly square.
You need to align the square-like end of the optical cable to the
orientation of the TV’s optical jack. Once it is aligned, the
cable’s plug should slip into the jack with a slight push. You
may hear and feel a small “click” once the cable is inserted
completely
NOTE 2: If your TV does not have an optical jack, you can use
one of the supplied analog signal cables. See instructions later
4 Turn off your TV’s
internal speakers
Some TVs require you to go into the audio
menu of the TV and turn off the TV’s internal
speakers in order to get an audio signal
from the optical jack. Also, turning off the
TV speakers prevents an ‘echo’ caused by
both the ZVOX speaker and the TV speaker
playing together. Using the remote that
originally came with the television, access
the setting and turn off the internal TV
speakers. If you are unsure how to do this,
get your TV’s model number from the rear
panel and call us at 1-866-367-9869. A
ZVOX representative
will then walk you through it.
Back of TV
a
Alternative Ways To Connect The AV100 TV Speaker
If your TV doesn’t have an optical audio output, here are some other options:
AccuVoice AV100 TV Speaker AccuVoice AV100 TV Speaker
b
Back of TV
Minijack Analog Audio Out
Some TVs have a 3.5mm audio output AV100jack or a
headphone jack. Insert one end of the supplied analog
“Miniplug to Miniplug” cable into the TV’s audio out miniack.
Insert the miniplug at the other end of the cable into the ZVOX
speaker’s rear input jack labeled MINIJACK INPUT ANALOG
(STEREO) OR OPTICAL DIGITAL.
If the TV has a headphone jack, you will want to make sure that
the TV’s volume is turned up to 50 to 75-percent of maximum
volume to make sure that the ZVOX speaker is receiving a
strong audio signal to amplify.
Red and White RCA Jack Analog Audio Out
Some TV models use red and white RCA jacks for the analog audio
output. Be sure you have located red and white jacks on the TV that
are marked as an “OUTPUT” (not “INPUT”). Next, identify the cable
supplied with the ZVOX speaker that has a stereo miniplug at one
end and red and white RCA plugs at the other end.
Make The Connection
Insert the end of the cable with red and white plugs into the red
and white jacks on the TV labeled “OUT”. Insert the miniplug at the
other end of the cable into the ZVOX speaker input jack labeled
MINIJACK INPUT ANALOG (STEREO) OR OPTICAL DIGITAL.
AccuVoice AV100 TV Speaker
Connect To Your Cable Or
Satellite TV Set Top Box
If your TV’s audio output is inaccessible (on a wall-mounted TV,
for instance) or unavailable, you can connect the audio output of
your cable or satellite set top box to the ZVOX speaker. Most set
top boxes have an “audio output” in addition to the HDMI output
intended for use with the TV.
To connect between the set top red and white jacks and the ZVOX
speaker, identify the cable supplied with the ZVOX speaker that
has a stereo miniplug at one end and red and white RCA plugs at
the other end.
Follow the “Make The Connection” instructions in the
previous column.
c
Back of
Cable/Sat Set Top Box
AccuVoice AV100 TV Speaker
3


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Zvox AccuVoice AV100 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Zvox AccuVoice AV100 in the language / languages: English as an attachment in your email.

The manual is 0.79 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info