596113
50
Zoom out
Zoom in
Previous page
1/60
Next page
96
97
Troubleshooting
If you encounter problems while using the phone, or if it performs abnormally,
you can refer to the chart below. If your particular problem cannot be
resolved using the information in the chart, contact the dealer where you
purchased the phone.
Problem Possible causes Possible solution
Poor reception The network signal is too weak at
your current location, for example, in
a basement or near a tall building,
because wireless transmissions
cannot effectively reach it.
Move to a location where the
network signal can be properly
received.
The network is busy at the current
time (for example, during peak times,
there may be too much network
trafc to handle additional calls).
Avoid using the phone at such
times, or try again after waiting
a short time.
You are too far away from a base
station for your service provider.
You can request a service area
map from your service provider.
Echo or noise Poor network link quality on the part
of your service provider.
End the call and dial again. You
may be switched to a better-
quality network link or phone
line.
Poor local telephone line quality. End the call and dial again. You
may be switched to a better-
quality network link or phone
line.
Unable to
select certain
features
Your service provider does not
support these features, or you have
not applied for services that provide
these features.
Contact your service provider.
TROUBLESHOOTING
TROUBLESHOOTING
Problem Possible causes Possible solution
Battery not
charging
The battery or battery charger is
damaged.
Contact the dealer.
The phone’s temperature is below 0°C
or higher than 45°C.
Adjust the environment to avoid
extremes of temperature.
Poor contact between the battery
and charger.
Check all connectors to make
sure all connections have been
properly made.
Shortened
standby time
The standby time is related to your
service provider system conguration.
The same phone used with different
service providers’ systems will not
provide exactly the same length of
standby time.
If you are located in an area
where signaling is weak,
temporarily power off the phone.
The battery is depleted. In high
temperature environments, battery life
will be shortened.
Use a new battery.
Battery power is consumed in a
variety of ways, including sending
out signals to locate a base station
when you are unable to connect to
a network.
Turn off Wi-Fi, GPS, and Bluetooth
if they are not being used. You
can also adjust your screen
brightness and timeout duration
in Settings > Display.
Cannot turn
your phone on
Battery power has been depleted. Recharge the phone’s battery.
micro-SIM card
error
The micro-SIM card has
malfunctioned or is damaged.
Take the micro-SIM card to your
service provider for testing.
micro-SIM card inserted improperly. Insert the micro-SIM card
properly.
Debris on the micro-SIM card
contacts.
Use a soft, dry cloth to clean the
micro-SIM card contacts.
50


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for ZTE Z-787 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of ZTE Z-787 in the language / languages: English as an attachment in your email.

The manual is 2,68 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info