596102
27
Zoom out
Zoom in
Previous page
1/40
Next page
  Auto Keypad Lock: Configure your phone to lock the keypad when it is not in
use. You can select the time delay from the available choices. If you select Off,
the phone will not lock the keypad automatically.
  Main Menu Style: Set the main menu to be displayed as a list or a grid.
  Default Storage Location: Assign either the phone or the memory card as the
location where the phone will save downloaded files.
  TTY Setting: Toggle TTY functionality. Please refer to “TTY Mode” under
Accessibility in this manual for more information about this feature.
•  T-coil Setting: Enables you to hear the phone’s audio through a hearing aid with
a telecoil. Please refer to “HAC Mode” under Accessibility in this manual for more
information about this feature.
  Phone Info: View technical information about your phone, including My Device
Number, Version Info, Icon Glossary and Operating System.
Profiles
A profile is a set of configurations appropriate to a specific environment. Each
profile allows you to set the ringtone volume/vibration, the earpiece volume, and
the warning tone.
From the home screen, select Main Menu > Settings > Profiles.
Select a profile and press the Left Soft Key to edit that profile.
•  Voice Call Ringtone: Set the voice call ringtone.
•  Ringtone Volume: Set the volume of the ringtone.
•  Alert Type: Set the ring type (e.g. ring, vibrate and ring).
•  Receiver Volume: Set the volume of the receiver.
•  Message Tone: Set the notification ringtone for an incoming SMS or
MMS message.
46 Settings
•  Key Tone: Enable or disable keypad tones when dialing.
•  Warning Tone: Turn the warning tone on or off.
•  Power On/Off Tone: Turn on/off the sound that plays while powering on/off
the phone.
  Missed Calls Alert: Enable, disable, and set timing for the missed calls
audible notification.
Call Settings
From the home screen, select Main Menu > Settings > Call Settings.
Earphone Auto Answer: You can configure the phone to answer incoming calls
automatically when an earphone is connected to the phone.
Any Key to Mute: This option allows you to silence the ringtone by pressing any key
when there is an incoming call.
Connection Reminder: When a call connects, you will hear a three-tone beep to
notify you that the connection was successful.
Minute Reminder: When this setting is enabled, you will hear a short beep every
minute while a call is in progress. You will hear the first beep after 50 seconds, then
1 minute 50 seconds, etc.
Send My Caller ID: This function allows you to prevent others from seeing your
phone number when making outbound calls.
Off: The call recipient will not see your phone number.
On: The call recipient will see your phone number.
Set by Network: The network chooses whether to show/hide your
phone number.
Auto Redial: Sets the phone to repeatedly redial, in the event of a busy signal, until
it successfully makes a connection.
47Settings
27


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for ZTE Z-431 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of ZTE Z-431 in the language / languages: English as an attachment in your email.

The manual is 2,87 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info