596100

ZTE Z-222 Manual

22
Zoom out
Zoom in
Previous page
1/34
Next page
Answer Mode
Flip Open
This function allows you to answer an incoming call by directly opening the flip, but
without pressing the Send Key or OK Key.
Any Key
This function allows you to answer an incoming call by pressing any key on the
keypad.
Security Settings
Phone Password
A password can protect your phone and help avoid illegal use. If your phone is
password protected, you will have to enter the correct password when the phone
is turned on.
• For a new phone, the protection function is not activated by default, and the
default password is 0000.
• From idle mode, select Menu > Settings > Security > Activate security codes >
Phone lock code to start or stop password protection.
• From idle mode, select Menu > Settings > Security > Change security codes
> Phone lock code to change the phone’s password. It is suggested that you
change the password to something you will easily remember.
Notes:
• Please remember the password you set. Without it your phone cannot be used
normally and you will need to contact your service provider to unlock it.
• Contact your service provider for more information.
PIN Codes
A PIN code is the personal identification code used by the SIM card. Its purpose
is to help you avoid illegal use of your SIM card. The correct PIN code should be
entered when the new phone is first turned on, otherwise the phone will only be
able to make emergency calls.
• For a new card, the default code is supplied by the service provider.
• From idle mode, select Menu > Settings > Security > Activate security codes >
PIN code to enable or disable the PIN code.
• From idle mode, select Menu > Settings > Security > Change security codes >
PIN code to change the PIN code.
• If you enter the wrong PIN code three times in a row, the phone will lock the SIM
card and prompt you to enter a PUK code to unlock it.
Notes:
• If you change the PIN code, be sure to remember the new number.
• PIN2 is needed for some settings. Use the same procedure as for the PIN code.
PUK Codes
A PIN Unlock Key (PUK) code is the unlock code for the SIM card. When the SIM
card is locked, you have to enter the correct PUK code and then enter the new PIN
code. The SIM card can then be used normally.
• A PUK code may be supplied with a new card. Contact your service provider for
more information.
• A PUK code can only be entered 10 times in a row. If you enter the wrong PUK
code more than 10 times, the SIM card will be locked indefinitely.
Note: If a PUK code is supplied with the new card, remember to store it safely.
Settings Settings36 37
… 22 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for ZTE Z-222 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of ZTE Z-222 in the language / languages: English as an attachment in your email.

The manual is 1,23 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info