596052
6
Zoom out
Zoom in
Previous page
1/58
Next page
Installing the microSDHC™ card
The microSDHC card can be installed and removed while the phone is
powered on. Unmount the microSDHC card before removing or replacing it.
1. Remove the back cover.
2. Hold your microSDHC card with the metal contacts
facing down and slide it into the card slot.
3. Press the back cover gently back into place until you
hear a click.
Note: Some applications may require a microSDHC card
to work normally or may store certain data on it. Therefore, it
is recommended that you keep a microSDHC card installed
and not remove or replace it randomly.
Charging the battery
Your phone’s battery should have enough power for the phone to turn on,
nd a signal, and make a few calls. You should fully charge the battery as
soon as possible.
If the battery is low, there will be a pop-up message on the screen. As you
charge your phone, the screen will tell you the exact battery level each time
you wake up your phone.
Note: If the battery is extremely low, you may be unable
to power on the phone even when it is being charged.
In this case, try again after charging the phone for at
least 10 minutes. Contact customer service if you still
cannot power on the phone after prolonged charging.
1. Insert the charger’s connector into the charging port.
Be sure to insert the connector in the correct
orientation. Do not force the connector into the port.
9GETTING STARTED8 GETTING STARTED
2. Plug the charger into a standard AC wall outlet.
3. When the battery is fully charged, unplug the charger and disconnect it
from the phone.
Warning! Use only ZTE-approved chargers and cables. The use of unapproved
accessories could damage your phone or cause the battery to explode.
Extending the battery life
Active applications, screen brightness levels, Bluetooth and Wi-Fi usage and
GPS functionality can drain your battery. You can follow the helpful tips below
to conserve your battery power:
Reduce the screen backlight time.
Lower the screen brightness.
Turn auto-sync, Wi-Fi, and Bluetooth off when not in use.
Disable the GPS function when not in use. Most applications using this
function will periodically query the GPS satellites for your current location;
each query drains your battery.
Powering your phone on/off
Make sure the micro-SIM card is in your phone and the battery is charged.
Press and hold the Power key to power on your phone.
To power it off, press and hold the Power key to open the options menu.
Tap Power off > OK.
Setting up your phone for the rst time
When you rst power on your phone after you purchase it or reset it to factory
settings (see Phone settings – Personal – Backup & reset), you need to set up
your phone settings before using it.
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for ZTE Sonata 2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of ZTE Sonata 2 in the language / languages: English as an attachment in your email.

The manual is 3,47 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info