Besides using an AC adapter, the RFX-300 can also be
powered from six IEC R6 (size AA) alkaline batteries.
When the unit is running on battery power, the POWER
indicator on the top panel begins to flash when the batteries
are nearing depletion.
In such a case, replace
the batteries as soon
as possible.
To Operate the Unit on Batteries
1. Verify that the AC adapter, sound source,
and playback equipment are correctly
connected to the RFX-300.
2. Turn on the system in the following order:
sound source RFX-300 playback
equipment.
The INPUT control and OUTPUT control of the
RFX-300 and the volume control of the playback
equipment should be set to minimum before turning
the system on.
3. Turn up the INPUT control to adjust the
input level.
When the sound source output is at maximum, the
PEAK indicator should flash occasionally.
4. Adjust the OUTPUT control and the volume
control of the playback equipment to obtain
a suitable playback volume.
5. Use the BANK keys and the EFFECT
selector to choose the desired effect.
When the BANK key A is lit, the effects printed in the
upper line are selected. When the BANK key B is lit,
the effects printed in the lower line are selected.
Turning the Unit On
Live Performance
This is an example for connecting an
instrument or microphone to the RFX-
300 and using it as a single effect device
during a live performance.