533801
43
Zoom out
Zoom in
Previous page
1/140
Next page
43
Mixing
The parameters that can be set for each type of track are as follows.
Mono tracks: 1–8
Stereo tracks: 1/2–7/8
Display Parameter
Setting range
(default value)
Explanation
Mono
tracks
Stereo
tracks
Master
track
PAN
PAN
L100~R100
(Center)
Adjusts a track’s PAN. For stereo tracks adjusts the volume
balance between the left and right channels.
EQ HI High-frequency range boost/cut
EQ HI
TYPE
EQ HI, HI CUT
(EQ HI)
Set whether to boost/cut the high-frequency range (
EQ HI
)
or clearly cut unnecessary high frequencies (
HI CUT
). This
parameter can only be accessed when
EQ HI
is on.
GAIN
–12dB~12dB
(0dB)
Adjust amount of boost/cut of high frequencies by -12 ~ +12
dB. This parameter is shown only when the
TYPE
is set to
EQ
HI
. When set to
HI CUT
, it is not shown.
FREQUENCY
500Hz~18kHz
(8.0kHz)
Adjust the EQ boost/cut frequency of high frequencies. This
parameter can only be accessed when
EQ HI
is on.
EQ MID Middle-frequency range boost/cut
EQ MID
GAIN
–12dB~+12dB
(0dB)
Adjust amount of boost/cut of middle frequencies by -12 ~
+12 dB. This parameter can only be accessed when
EQ MID
is on.
FREQUENCY
40Hz~18kHz
(1.0kHz )
Adjust EQ boost/cut frequency of middle frequencies. This
parameter can only be accessed when
EQ MID
is on.
Q
0.1~2.0
(0.5)
Adjust the width of the middle frequency band affected. This
parameter can only be accessed when
EQ MID
is on.
EQ LOW Low-frequency range boost/cut
EQ LO
TYPE
EQ LO, LO CUT
(EQ LO)
Set whether to boost/cut the low-frequency range (
EQ LO
)
or clearly cut unnecessary low frequencies (
LO CUT
). This
parameter can only be accessed when
EQ LO
is on.
GAIN
–12dB~+12dB
(0dB)
Adjust amount of boost/cut of low frequencies by -12 ~+12
dB. This parameter is shown only when the
TYPE
is set to
EQ
LO
. When set to
LO CUT
, it is not shown.
FREQUENCY
40Hz~1.6kHz
(125Hz)
Adjust EQ boost/cut frequency of low frequencies. This
parameter can only be accessed when
EQ LO
is on.
Effect send levels
REV SEND
REVERB
SEND LEVEL
0~100
(0)
Adjust the signal level sent from the track to the reverb effect.
CHO SEND
CHORUS/
DELAY SEND
LEVEL
0~100
(0)
Adjust the signal level sent from the track to the chorus/delay
effect.
FADER
FADER
0~127
(100)
Adjust the current volume.
ST LINK
STEREO LINK
On/Off
(Off)
Switch on/off to set the stereo link function that
connects two mono tracks together.
INVERT
INVERT
On/Off
(Off)
Set whether the phase of a track is inverted or not. Set it to
Off
to use normal phase or
ON
to invert the phase.
NOTE
Use the ON/OFF soft key to turn EQ HI,
EQ MID, EQ LO, REV SEND, CHO SEND and
INVERT parameters ON/OFF.
When a stereo link is ON, the INVERT
parameter is shown as INVERT L for the
odd track, and as INVERT R for the even
track.
43


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Zoom R8 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Zoom R8 in the language / languages: English as an attachment in your email.

The manual is 53,81 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Zoom R8

Zoom R8 User Manual - German - 140 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info