533786
20
Zoom out
Zoom in
Previous page
1/124
Next page
Quick Guide
20 ZOOM PS-04
H
INT
When the built-in mic is selected as recording source, the [MIC] key lights up. You can
also select the built-in mic by pressing the [MIC] key from the AUDIO mode top screen.
(In this case, there is no need to call up the above track parameter screen.)
• If desired, you can also combine multiple input sources (
p. 53).
• When the built-in mic can be used, the [MIC] key is flashing.
When the insert effect algorithm is "GUITAR/BASS", the built-in mic cannot be used
(except when the effect type "CABI" is selected on the PRE AMP/DRIVE module or when
it is turned off). In this case, the "REC" indication for the built-in mic is out.
3.
When the [INPUT] jack has been selected as input source, play the instrument
connected to the jack and adjust the input sensitivity by turning the [INPUT
LEVEL] knob on the rear panel of the PS-04.
When using the [INPUT] jack, adjusting the input sensitivity with the
[INPUT LEVEL] knob is necessary. Make the adjustment so that the sound is
not distorted when playing the instrument at maximum level. (If the
indication "-PEAK-" is shown on the display, signal distortion has occurred.)
H
INT
When the built-in mic is selected as input source, two gain settings (on-mic/off-mic) are
available. The default is on-mic, but this can be changed if desired (
p. 99).
When the [LINE IN] jack is selected as input source, adjust the output level of the source
equipment so that there is no distortion in the input stage of the PS-04.
4.
While playing the instrument, operate the fader for the input source to adjust
the recording level.
While one of the above screens is being shown, faders 1 – 4 can be used to adjust the recording
level for each recording source. When you move a fader, the current setting value is shown on the
display. A rough indication of the setting for each source is given by the level meter segments.
INPUT
INPUT
LINE
LINE
MIC
MIC
When built-in mic (status key 1) is selected When [INPUT] jack (status key 2) is selected
When [LINE IN] jack (status key 3 or 4) is selected
20


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Zoom PS-04 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Zoom PS-04 in the language / languages: English as an attachment in your email.

The manual is 1,59 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Zoom PS-04

Zoom PS-04 User Manual - German - 124 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info