533782
175
Zoom out
Zoom in
Previous page
1/184
Next page
ZOOM MRS-802 Ver 2.0
3
Using MIDI Time Code (MTC)
In addition to the conventional Timing Clock output, the
MRS-802 Version 2.0 also supports the MIDI Time Code
(MTC). Whereas the conventional Timing Clock signal is
based on tempo information set internally by the MRS-
802, the MTC specifies the current position in hours/
minutes/seconds/frames, representing absolute time
information. This assures more stable synchronization
than with Timing Clock, and allows the tempo to be
freely set at the receiving device.
The device sending the MTC signal is called the MTC
master and the receiving device is called the MTC slave.
The MRS-802 Version 2.0 can operate only as MTC
master. For synchronization, the device operating as
MTC slave must be set to lock onto the MTC signal. The
frame rate per second can be selected from 24, 25, 29.97
and 30, to match the connected device.
For example, to connect the MRS-802 Version 2.0 to a
MIDI sequencer for synchronization, make connections
as follows.
This setting determines whether MIDI Time Code (MTC)
messages are used for MIDI synchronization.
1.
Press the [DRUM] key in the rhythm
section, and then press the [UTILITY] key.
The rhythm utility menu for making various rhythm
section settings appears.
2.
Use the cursor left/right keys to bring up
the indication “Utility MIDI” on the display.
3.
Press the [ENTER] key.
The display changes as follows. Now you can select
MIDI-related setting items.
4.
Use the cursor left/right keys to bring up
the indication “MIDI MTC” on the display.
5.
Press the [ENTER] key, and turn the dial to
change the setting. The following settings
are available.
24 (24 frames/second)
25 (25 frames/second)
29.97nd (29.97 frames/second, non-drop)
30 (30 frames/second, non-drop)
When the MRS-802 Version 2.0 runs, MTC signals
will be sent out at the selected frame rate.
OFF
No MTC signals are sent.
6.
When you have finished making settings,
press the [EXIT] key several times.
The unit returns to the main screen.
About the MIDI Time Code (MTC)
Making MIDI Time Code (MTC)
settings
MTC master
MTC slave
Sequencer
MRS-802
MIDI OUT
connector
MTC
MIDI
IN
Utility
Utility
Drum Kit
Drum Kit
Utility
Utility
MIDI
MIDI
MIDI
MIDI
DRUM CH
DRUM CH
MIDI
MIDI
MTC
MTC
MTC
MTC
30
30
MRS802v2(E).fm 3 ページ 2004年5月27日 木曜日 午後5時59分
175


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Zoom MRS-802 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Zoom MRS-802 in the language / languages: English as an attachment in your email.

The manual is 3,07 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Zoom MRS-802

Zoom MRS-802 User Manual - German - 180 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info