533782
130
Zoom out
Zoom in
Previous page
1/184
Next page
Reference [MIDI]
ZOOM MRS-802
130
Setting the drum kit MIDI
channel
You can specify the MIDI channel for the drum kit.
Refer to steps 1 - 4 of “Basic procedure” to bring up the
indication “MIDI DRUM CH” on the display. Then turn the
dial to select one of the following settings.
•1 - 16CH
MIDI channels 1 - 16 (default: 10)
OFF
Channel messages (Note On/Off messages) will not be
transmitted or received.
If you specify a MIDI channel (1 - 16) for the drum track,
you can transmit Note On/Off messages from an external
MIDI device on that MIDI channel to play the sounds of the
MRS-802’s drum kit. Also, when you play back a rhythm
pattern (or rhythm song) on the MRS-802, the content of the
drum track will be transmitted as Note On/Off messages.
NOTE
If the “DRUM CH” setting is OFF, Note On/Off messages as
well as Control Change messages will not be transmitted or
received.
Specifying transmission of
Timing Clock messages
This setting specifies whether the MIDI synchronization
message Timing Clock will be transmitted.
Refer to steps 1 - 4 of “Basic procedure” to bring up the
indication “MIDI CLOCK” on the display. Then turn the
dial to select one of the following settings.
ON (Transmission on)
MIDI Timing Clock will be transmitted when the MRS-802
is running (default setting).
OFF (Transmission off)
Timing Clock will not be transmitted.
Timing Clock will be output according to the tempo of the
rhythm pattern/rhythm song that is playing. In order for the
external MIDI device to play back in synchronization at an
appropriate tempo, you will need to specify the tempo and
time signature of the rhythm pattern (rhythm song) even if
you are not using the rhythm section.
NOTE
Timing Clock will be transmitted even if the drum track is
muted (DRUM status key out).
HINT
When using MIDI Timing Clock messages transmitted
from the MRS-802 to synchronize the operation of an
external MIDI device, you should also turn on transmission
for Song Position Pointer and Start/Stop/Continue
messages as well as Timing Clock.
When transmitting Timing Clock from the MRS-802, it is
recommended to turn the drum MIDI channel OFF.
Synchronization may become unstable if MIDI messages
other than Timing Clock are also being transmitted.
DRUM CH
DRUM CH
10CH
10CH
CLOCK
CLOCK
ON
ON
130


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Zoom MRS-802 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Zoom MRS-802 in the language / languages: English as an attachment in your email.

The manual is 3,07 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Zoom MRS-802

Zoom MRS-802 User Manual - German - 180 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info