533782
105
Zoom out
Zoom in
Previous page
1/184
Next page
Reference [Effects]
ZOOM MRS-802
105
9.
If you want to adjust the patch level (the final
volume of the patch), use the cursor up/down keys
to bring up the indication “TOTAL PAT LVL”, and
turn the dial.
The patch level can be adjusted in a range of 1 - 30.
10.
When you have finished editing, press the [EXIT]
key.
The unit returns to the patch select screen.
NOTE
Keep in mind that if you return to the patch select screen and
select another patch without first storing the patch, the
edited contents will be lost. If you want to keep the results of
your editing session, refer to the following section.
Storing an insert effect patch
A patch that you have edited can be stored in any location of
the same algorithm. You can also store an existing patch in
another location to create a copy of that patch.
1.
Press the [INSERT EFFECT] keys in the display
section, and then press the [EDIT] key.
The currently selected patch can now be edited. Perform any
editing steps that you wish to make.
2.
When editing is complete, press the [STORE] key in
the control section.
A screen for specifying the store target location appears on
the display.
3.
Turn the dial to select the store destination patch
number.
4.
To store the patch, press the [STORE] key once
more.
The patch will be stored, and the unit returns to the patch
select screen.
HINT
Patches that you have stored are saved on the hard disk
as part of the project.
Patch data included in an already existing project can be
loaded into the current project (
p. 110).
Editing the name of an insert effect
patch
This section explains how to edit the name of the currently
selected patch.
1.
Press the [INSERT EFFECT] keys which includes
the target patch. Then use the PATCH SELECT
[
Q
]/[
W
] keys or the dial to select the patch that
you want to edit.
2.
Press the [EDIT] key.
The currently selected patch can now be edited.
3.
Use the cursor left/right keys to bring up the
indication “TOTAL PAT LVL”.
4.
Repeatedly press the cursor down key to bring up
the indication “PAT NAME”.
The name of the selected patch can now be edited. The
character currently selected for editing flashes.
5.
Use the cursor left/right keys to move the flashing
position to the character you want to change, and
turn the dial to select a character.
For information on available characters, refer to page 34.
6.
Repeat step 5 as necessary to complete the new
name.
TOTAL
TOTAL
PAT LVL
PAT LVL
23
Patch number
STORE
STORE
MRS-Drv
MRS-Drv
1
TOTAL
TOTAL
PAT LVL
PAT LVL
24
PAT NAME
PAT NAME
MRS-Drv
MRS-Drv
105


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Zoom MRS-802 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Zoom MRS-802 in the language / languages: English as an attachment in your email.

The manual is 3,07 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Zoom MRS-802

Zoom MRS-802 User Manual - German - 180 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info