533782
101
Zoom out
Zoom in
Previous page
1/184
Next page
Reference [Effects]
ZOOM MRS-802
101
Changing the insert location of the
insert effect
When the project is in its initial state, the insert effect is
applied to the input mixer. However, you may change the
insert location as necessary. The procedure is as follows.
1.
From the main screen, press the [INPUT SOURCE]
key in the effect section.
The currently selected insert location appears on the display.
The following points are available.
•IN
Input mixer (default setting)
DRUM
Drum kit output
TR1 - TR8
Track 1 - 8 output
TR1/2, TR3/4, TR5/6, TR7/8
Track 1/2, 3/4, 5/6, 7/8 output
MASTER
Immediately before [MASTER] fader
2.
Use the dial to select the insert location.
HINT
While the display of step 1 is shown, you can select the insert
point by pressing the [INPUT 1]/[INPUT 2] keys and the
status keys. To select the track pairs 1/2, 3/4, 5/6, and 7/8,
press two status keys simultaneously.
3.
When the insert point has been selected, press the
[EXIT] key.
The unit returns to the main screen.
HINT
When the insert effect is applied to a point other than the
input mixer, the [INPUT SOURCE] key will be lit at the main
screen.
Selecting the patch for the insert
effect
This section explains how to select the patch for the insert
effect.
1.
Press the [INSERT EFFECT] keys in the display
section.
The key lights up, and the display indicates the patch
currently selected for this algorithm.
To select a patch for the insert effect, start by selecting the
algorithm (effect module combination). When you press the
[INSERT EFFECT] keys, the first line of the display shows
“INSERT” and the second line shows the patch for the insert
effect in this algorithm.
HINT
When the send/return effect was operated, the first line of the
display shows “SEND REV” or “SEND CHO”.
2.
Use the PATCH SELECT [
Q
]/[
W
] keys or turn the
dial to select the patch.
The selected patch becomes active immediately.
Algorithm
Patch number
0 – 24
0 – 44
0 – 14
0 – 14
CLEAN
DIST
ACO/BASS SIM
BASS
Algorithm
Patch number
0 – 49
0 – 49
0 – 49
0 – 29
MIC
DUAL MIC
LINE
MASTERING
Insert point of insert effect
IN SRC
IN SRC
IN
IN
Effect type
Patch name Patch number
INSERT
INSERT
MRS-Drv
MRS-Drv
1
101


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Zoom MRS-802 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Zoom MRS-802 in the language / languages: English as an attachment in your email.

The manual is 3,07 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Zoom MRS-802

Zoom MRS-802 User Manual - German - 180 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info