533782
86
Zoom out
Zoom in
Previous page
1/184
Next page
Reference [Rhythm]
ZOOM MRS-802
86
Inputting other event data
Once rhythm pattern information has been input to a rhythm
song, you can add various other information such as tempo
and rhythm section volume. Such data are called “event”
information.
1.
In rhythm song mode ([SONG/PATTERN] key lit),
verify that the [DRUM] key is lit.
2.
Press the REC [
O
] key.
Rhythm song step input becomes possible.
3.
Press the cursor up key repeatedly to bring up the
indication “EV
” on the display.
This screen lets you check which event information is
entered at the current point. The symbol after “EV” (such
as “Pt” or “TS”) denotes the type of event. Available events
and their symbols are listed in the table below.
HINT
If no tempo information is input for the rhythm song, the
tempo currently set for the rhythm section will be used. To
ensure that a rhythm song will always play with the same
tempo, be sure to enter tempo information at the
beginning of the song.
If desired, you can also adjust the tempo while a song is
playing by hitting the [TEMPO] key several times in
succession. Check the display to verify that the desired
tempo has been set.
4.
Move to the location at which you want to input a
new event.
You can change the input location in the following three
ways.
(1) Moving in steps of a measure
Use the cursor left/right keys to move to the beginning of the
preceding or following measure.
(2) Specify the location in beats
Use the REW [T]/FF [Y] keys to move to the beginning of
the preceding or following beat.
(3) Specify the location in 16th note units
Repeatedly press the cursor up key to bring up the indication
“EV”, and turn the dial to move forward or backward in
12-tick (16th note) units. You can check the position using
the counter display.
HINT
The current position is shown to the right of the counter in
measures / beats / ticks.
5.
Use the cursor up/down keys to select the type of
event that you want to input.
If the event you select here has been input at the current
location, its value will be displayed. If there is no
corresponding event, the display will indicate “ ”. This
means that the previously input event will apply.
6.
Turn the dial to input the value.
The event type “TimSig” can only be input in units of
measures. When you turn the dial within a measure, the
position automatically jumps to the start of the next
measure, and the new event is input at that location.
NOTE
When you change the TimSig event, only the measure and
beat division within the pattern changes. The duration of the
entire rhythm pattern does not change.
7.
Input the other events in the same way.
EV
EV
å
Ptn
TimSig
Tempo
DrVOL
Type of
event
Content
Symbol
Range
Rhythm pattern
number
Time signature
Tempo
Drum track
volume
000 – 510
1 – 8(1/4 – 8/4)
40.0 – 250.0
0 – 15
TimSig
TimSig
å
TimSig
TimSig
3
3
86


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Zoom MRS-802 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Zoom MRS-802 in the language / languages: English as an attachment in your email.

The manual is 3,07 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Zoom MRS-802

Zoom MRS-802 User Manual - German - 180 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info