533782
76
Zoom out
Zoom in
Previous page
1/184
Next page
Reference [Mixer]
ZOOM MRS-802
76
HINT
To cancel a scene assignment, turn the dial to make the
display indicate “ -- “.
6.
Locate the next mark at which you want the mix to
change, and repeat steps 4 - 5.
7.
When scenes have been assigned to all marks,
press the ZERO [
U
] key to return to the beginning
of the song, and then press the PLAY [
R
] key to
start playback.
Each time the song reaches a mark to which a scene has been
assigned, that scene will be recalled.
Deleting certain parameters from a
scene
If desired, you can disable a group of parameters saved in a
scene. Such parameters will not change even if that scene is
recalled. The following groups of parameters can be
specified and made active or inactive.
For example, after you have programmed a sequence of
automatic scene changes, you may want to disable the
TRACK PARAMETER group and set only the EQ and
panning parameters manually for each track.
1.
Press the [SCENE] key in the control section, and
then press the [UTILITY] key in the display section.
The following screen appears on the display. In this
condition, you can enable or disable the faders for each
scene.
2.
Turn the dial to set fader permission to ON or OFF.
3.
Press the other keys for parameter groups, to
enable or disable the group.
Except for the fader, scene control for the other groups can
be enabled or disabled by pressing one of the keys listed
below.
TRACK PARAMETER group
Any status key except [MASTER] status key
•INSERT EFFECT group
Any [INSERT EFFECT] key
CHORUS/DELAY group
[CHORUS/DELAY] key
REVERB group
[REVERB] key
When a group is enabled, the respective keys are lit, and
when the group is disabled, the keys are flashing.
HINT
The TRACK PARAMETER group can be enabled or
disabled for each audio track and the drum track
separately.
•You can also use the cursor up/down keys to enable or
disable all groups together.
4.
When the setting is complete, press the [EXIT] key.
The unit returns to the scene menu.
5.
To return to the main screen, press the [EXIT] key.
The parameter group on/off status is stored as part of the
project.
TRACK
PARAMETER
INSERT EFFECT
CHORUS/DELAY
REVERB
ALL FADER
EQ HI
EQ LO
Chorus send
Reverb send
Pan
Play/mute
Patch number
Input source
Patch number
Patch number
Fader position
Item Group
Permissn
Permissn
AllFader
AllFader
ON
76


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Zoom MRS-802 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Zoom MRS-802 in the language / languages: English as an attachment in your email.

The manual is 3,07 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Zoom MRS-802

Zoom MRS-802 User Manual - German - 180 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info