533782
28
Zoom out
Zoom in
Previous page
1/184
Next page
Quick Tour
ZOOM MRS-802
28
Step 4: Mixdown
When you have finished recording all tracks, you can use the
built-in mixer to adjust parameters such as volume level, EQ
(equalizer), and panning (stereo left/right positioning) to
create a pair of stereo tracks to create the finished song. This
process is called “mixdown”.
The result of the mixdown process can be either recorded on
an external master recorder or on the master track
incorporated in the MRS-802. The following example
describes recording on the master track.
HINT
Instead of the master track you can also select one or two
ordinary tracks as recording target. This is called “bounce
recording”. After using this function, you can switch the
source V-take and record a new part. This is convenient
when there are not enough free recording tracks. (For
information on the bounce function, see page 39.)
4.1 Preparations for mixdown
1.
Make sure that all status keys for the tracks you
want to mix are lit in green, and that the other
status keys are out.
If the rhythm section was used simply as guide rhythm, turn
the [DRUM] status key off so that the drum track will not be
added to the mix.
2.
Turn the [INPUT 1] and [INPUT 2] keys off.
HINT
You can also add the signal from input 1 and/or input 2 to the
mix. To do this, set the [INPUT 1] and/or [INPUT 2] key to on.
3.
Set the [MASTER] fader to 0 dB.
4.2 Adjusting volume, panning, and
EQ
1.
On the main screen, press the [TRACK
PARAMETER] key. The track parameter menu
appears which lets you set parameters separately
for each track.
2.
Use the status keys or the cursor left/right keys to
select a track.
When the track parameter display is shown, you can use the
status keys or the cursor left/right keys to select a track. The
currently selected status key is lit in orange.
3.
Use the cursor up/down keys to select a track
parameter.
The currently selected parameter is shown on the second
line of the display. Selectable track parameters and setting
ranges are as follows.
Track name
Parameter Setting
TR1
TR1
FADER
FADER
00
TR3
TR3
FADER
FADER
00
•Track parameter and setting range
Parameter Display Setting range Description
EQ HIGH GAIN
EQ HI G
-12 – +12 Adjusts high-frequency boost/cut from -12 dB to +12 dB.
EQ HIGH FREQUENCY
EQ HI F
500 – 18000(Hz) Adjusts turnover frequency for high-frequency boost/cut.
EQ LOW GAIN
EQ LO G
-12 – +12 Adjusts low-frequency boost/cut from -12 dB to +12 dB.
28


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Zoom MRS-802 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Zoom MRS-802 in the language / languages: English as an attachment in your email.

The manual is 3,07 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Zoom MRS-802

Zoom MRS-802 User Manual - German - 180 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info