533782

Zoom MRS-802 Manual

24
Zoom out
Zoom in
Previous page
1/184
Next page
Quick Tour
ZOOM MRS-802
24
Step 2: Recording the first track
In this step, you record the first track while listening to the
rhythm section. As an example we describe how to record an
electric guitar on track 1 with the insert effect.
2.1 Adjusting input sensitivity
1.
Connect an instrument to the GUITAR/BASS jack
(
→
p. 15).
To connect a synthesizer or other component with line-level
stereo output, use the INPUT 1/INPUT 2 jacks on the rear
panel. To connect a guitar or bass, use the GUITAR/BASS
jack.
HINT
When something is connected to both the GUITAR/BASS
jack and the INPUT 1 jack on the rear panel,the GUITAR/
BASS jack has priority. To adjust the GUITAR/BASS input
sensitivity or switch the jack on/off, use the INPUT 1 control.
2.
Press the [INPUT 1] key so that the key lights up.
The [INPUT 1]/[INPUT 2] keys serve to switch the
respective input on and off. While the key is lit, the input is
active.
HINT
To record the output of a synthesizer or similar in stereo,
connect the L and R output to the INPUT 1/INPUT 2 jacks
and press both the [INPUT 1] and [INPUT 2] keys so that both
keys are lit.
3.
While playing the instrument, use the [INPUT]
control 1 to adjust sensitivity.
Adjust the control so that the [PEAK] indicator lights up
occasionally when you play the instrument at the loudest
level.
4.
While playing the instrument, use the [REC LEVEL]
control to adjust the recording level.
The [REC LEVEL] control modifies the signal level going
to the recorder (after passing the insert effect). The IN1/IN2
level meter in the lower left of the display shows the level.
Set the level as high as possible, but avoid settings that cause
the 0 dB indicator to light during play peaks.
If the recording level setting is too high, the [CLIP] indicator
of the [REC LEVEL] control lights up.
2.2 Applying the insert effect
The signal supplied to the MRS-802 can be modified with
the insert effect. This effect can be applied to the input, to
any track, or immediately before the [MASTER] fader. The
insert effect actually is a multi-effect unit that contains a
number of single effects (effect modules) such as
compressor, distortion, and delay, connected in series. A
combination of effect modules that can be used
simultaneously is called an “algorithm”.
The following steps show how to select an algorithm and
apply the insert effect to the guitar signal connected to the
GUITAR/BASS jack.
1.
Press the [INPUT SOURCE] key in the effect
section.
The insert position of the insert effect is indicated on the 2nd
line of the display. The default is “IN” (INPUT). To change
the setting, turn the dial to select “IN”.
Lit
Lights up occasionally
INPUT 1 Level INPUT 2 Level
[CLIP] indicator
… 24 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Zoom MRS-802 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Zoom MRS-802 in the language / languages: English as an attachment in your email.

The manual is 3,07 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Zoom MRS-802

Zoom MRS-802 User Manual - German - 180 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info