533781
121
Zoom out
Zoom in
Previous page
1/148
Next page
Troubleshooting
ZOOM MRS-8
121
The recorded sound is distorted
Check whether the input sensitivity setting and
record level setting are appropriate.
When the insert effect is applied to the input, check
whether the effect output level (patch level) setting
is appropriate.
Problems with effects
Insert effect does not work
Make sure that the [INSERT EFFECT] key is lit.
Check whether the insert effect position has been
selected correctly.
Send/return effect does not work
Make sure that the [SEND/RETURN] key is lit.
Make sure that the send level for the track is raised
(
p. 28).
Problems with the rhythm
section
Cannot hear the rhythm pattern playback
Press the [DRUM/BASS] key repeatedly to select
the desired sound (drum kit/bass program), and then
operate the [RHYTHM] fader.
Press the [DRUM/BASS] key repeatedly to select
the desired sound (drum kit/bass program), and then
press the [RHYTHM] status key repeatedly until the
key is lit in green.
If the drum/bass sequence level has been set to zero
within a pattern, that sound will not be heard. Raise
the level setting for the drum/bass sequence (
p.
74).
Cannot hear the rhythm song playback
Make sure that you have not selected an empty
rhythm song (
p. 76).
Make sure that the selected rhythm song does not
include an event with a volume level zero setting
(
p. 83).
No sound when you tap the pads
If the pad sensitivity has been set to “SOFT”, loud
sounds will not be produced even when you tap the
pad strongly. Change the pad sensitivity setting
(
p. 90).
Cannot create a new rhythm pattern/
rhythm song
If the display indicates “SEQ FULL”, the rhythm
section memory has been used to maximum capacity.
Delete unneeded rhythm patterns or songs to free up
memory.
Notes recorded in the rhythm pattern do
not play
Notes that exceed the maximum polyphony (6 sounds for
drum kit, 1 sound for bass program) will not be played.
Delete some of the notes that have been recorded to stay
within the maximum polyphony.
Problems with MIDI
Cannot synchronize with external MIDI
device
Make sure that the MIDI cable is correctly connected
from the MIDI OUT connector of the MRS-8 to the
MIDI IN connector of the external device.
Synchronization with an external MIDI device is
only possible by using the MIDI clock or MTC
output from the MRS-8.
Make sure that the external MIDI device is set to
receive MIDI clock or MTC and synchronize to it.
When synchronizing on the timing clock, make sure
that output is enabled for Timing Clock, Song
Position Pointer, and Start/Stop/Continue messages
at the MRS-8 (
p. 110).
MRS-8(E).book 121 ページ 2004年7月30日 金曜日 午後5時24分
121


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Zoom MRS-8 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Zoom MRS-8 in the language / languages: English as an attachment in your email.

The manual is 3,95 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Zoom MRS-8

Zoom MRS-8 User Manual - German - 148 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info