533781

Zoom MRS-8 Manual

101
Zoom out
Zoom in
Previous page
1/148
Next page
Reference [Effects]
ZOOM MRS-8
101
4.
Turn the dial to switch the effect type.
When the effect type is changed, the effect parameters
will also change accordingly.
HINT
• If the contents of a patch have been changed, the “EDIT”
indicator in the upper part of the display will change to
“EDITED”. When the setting is returned to the original
condition, the indicator reverts to “EDIT”.
• By pressing the [ENTER] key during editing, you can
temporarily turn the effect off, which is convenient during
parameter adjustment. To turn the effect back on, press the
[ENTER] key once more.
5.
Use the cursor up/down keys to select the
effect parameter to edit.
The first line of the display shows the effect type, and the
second line shows the name and current value of the
effect parameter.
HINT
To change the effect type, press the cursor up key repeatedly
to bring up the indication of step 3, and then turn the dial.
6.
Turn the dial to change the setting.
For details on the effect types and effect parameters for
the send/return effect, refer to the appendix at the end of
this manual.
7.
To compare the sound of the currently
edited patch before and after editing, press
the [SEND/RETURN] key.
Pressing the [SEND/RETURN] key during editing
activates the compare function.
While the compare function is active, the display changes
as follows and the patch reverts to the last stored
condition.
To return to the edited patch, press the [SEND/RETURN]
key once more, or press the [EXIT] key.
8.
Repeat steps 5 – 6 as necessary to edit
other effect parameters.
9.
When you have finished editing, press the
[EXIT] key.
The send/return effect patch selection screen appears
again.
NOTE
Keep in mind that if you select another patch without first
storing the edited patch, the changes will be lost. For
information on how to store a patch, refer to the next section.
A patch that you have edited can be stored in any location
of the send/return effect. By storing an existing patch in
another location, you can create a copy of that patch.
Interchanging the position of patches (swapping) is also
possible.
1.
From the send/return effect patch selection
screen or edit screen, press the
[FUNCTION] key.
The currently selected patch goes into store standby
mode. In this condition, you can select whether to
perform store or swap.
2.
Use the cursor left/right keys to bring up
the indication “STORE TO” or “SWAP TO”.
3.
Turn the dial to select the number of the
patch to store/swap.
When carrying out store, the current patch settings will be
stored under this number.
When carrying out swap, the currently selected patch and
the patch settings selected here will be interchanged.
HALL
HALL
PRE DLY
PRE DLY
5
Effect parameter Setting value
COMPARE
COMPARE
VoChorus
VoChorus
0
Storing or swapping send/
return effect patches
STORE TO
STORE TO
VoChorus
VoChorus
0
Patch numbe
r
MRS-8(E).book 101 ページ ２００４年７月３０日　金曜日　午後５時２４分
… 101 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Zoom MRS-8 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Zoom MRS-8 in the language / languages: English as an attachment in your email.

The manual is 3,95 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Zoom MRS-8

Zoom MRS-8 User Manual - German - 148 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info