533778

Zoom MRS-4 Manual

22
Zoom out
Zoom in
Previous page
1/33
Next page
Use the left/right [PARAMETER/VALUE]
keys to move the flashing section, and use the
up/down [PARAMETER/VALUE] keys to
change the number.
5.
Press the [ENTER/YES] key.
A screen will appear that allows you to set a
start point for the erase action.
6.
Use the [PARAMETER/VALUE]
keys to specify the start point for
the segment to be erased.
The start location can be specified in two
ways.
For information on how to specify the
position, see page 40.
7.
When you have specified the start
point, press the [ENTER/YES] key.
A screen will appear that allows you to set
the end point for the erase action.
8.
Specify the end point in the same
way as described in step 6.
9.
When you have specified the end
point, press the [ENTER/YES] key.
The display changes as follows.
10.
To execute the erase process,
press the [ENTER/YES] key.
While erasing is in progress, the remaining
time is shown on the display as a percentage,
such as "doinG90". When the copy is
complete, the "tr Edit" screen returns.
The length of the processing interval depends on
setting conditions.
By pressing the [EXIT/NO] key instead of
the [ENTER/YES] key, you can return to the
display of the preceding step and make
changes.
Erasing an entire track
This operation erases all recorded data from
the specified track/V-take.
1.
While the main screen is shown,
press the [TRACK PARAMETER]
key.
The track parameter menu appears.
2.
Use the status keys 1 – 4 to select
the track to be erased. Then use
the left/right [PARAMETER/VALUE]
keys to call up the screen for
selecting the V-take.
The track number and V-take number are
shown.
3.
Press the [ENTER/YES] key.
The display changes as follows.
4.
Press the [ENTER/YES] key.
The track number and V-take number to be
erased are shown. (In the initial condition,
this is the V-take currently set for the track
selected in step 2.)
ER T1-1
Track number
V-take number
ERASE
T1-1
NOTE
YES NO
105560
103560
Reference [Track Editing]
ZOOM MRS-4
43
5.
If necessary, specify the track
number and V-take number, and
press the [ENTER/YES] key.
Use the left/right [PARAMETER/VALUE]
keys to move the flashing section, and use the
up/down [PARAMETER/VALUE] keys to
change the number. You can also specify a V-
take that is currently not selected for the
track.
When you press the [ENTER/YES] key, the
copy destination track number and V-take
number are shown.
6.
Specify the copy destination track
and V-take in the same way as
described in step 5.
7.
Press the [ENTER/YES] key.
The display changes as follows.
8.
To execute the copy, press the
[ENTER/YES] key.
While the copy is in progress, the remaining
time is shown on the display as a percentage,
such as "doinG90". When the copy is
complete, the V-take selection screen returns.
The length of the processing interval depends on
setting conditions.
By pressing the [EXIT/NO] key instead of
the [ENTER/YES] key, you can return to the
display of the preceding step and make
changes.
Erasing a specified
segment
This operation erases the recorded data from
the specified segment of a track, returning it
to a silent (blank) state.
1.
While the main screen is shown,
press the [SONG/UTILITY/TUNER]
key.
The display will show the song number.
2.
Press the right [PARAMETER/
VALUE] key once to bring up the
indication "tr Edit" (track edit) on
the display. Then press the
[ENTER/YES] key.
The first item of the track edit menu appears.
3.
Press the right [PARAMETER/
VALUE] key once to bring up the
indication "tr Ers" (track erase) on
the display. Then press the
[ENTER/YES] key.
The screen for specifying the track and V-
take to erase appears.
4.
Use the [PARAMETER/VALUE]
keys to specify the track and V-
take to erase.
SRC 1-1
TR ERS
Track number V-take number
TR COPY
NOTE
YES NO
CP T1-1
Copy destination
track number
Copy destination
V-take number
CP T1-1
COPY
Copy source
track number
Copy source
V-take number
ZOOM MRS-4
Reference [Track Editing]
42
… 22 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Zoom MRS-4 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Zoom MRS-4 in the language / languages: English as an attachment in your email.

The manual is 0,84 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Zoom MRS-4

Zoom MRS-4 User Manual - German - 64 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info