533778
7
Zoom out
Zoom in
Previous page
1/33
Next page
The insert effect processes the signal from input 1/2 before it is sent to the tracks for recording. In
this example, you apply the insert effect on the guitar signal supplied to the INPUT 1 jack. If you
do not wish to use the insert effect, proceed to section 2-3 on page 15.
1.
Press the [MIXDOWN] key and the [SEND/RETURN] key simultaneously.
The [MIXDOWN] key and [SEND/RETURN] key serve to select the effect to be used.
Pressing both keys simultaneously causes the keys to flash in red. This indicates that the
insert effect has been activated.
While the [MIXDOWN] key and [SEND/RETURN] key are both flashing simultaneously,
the mixdown effect and send/return effect cannot be used.
The display shows the currently selected algorithm (effect type).
The following algorithms are available for the insert effect.
2.
Use the [PARAMETER/VALUE] keys to select the algorithm and the setting value.
LIMIT 0
Using the insert effect
2-2
ZOOM MRS-4
13
This section describes how to record an electric guitar connected to the [INPUT 1] jack on track 1
to create the first track of a recording.
Connect the instrument to the input of the MRS-4 and adjust input sensitivity.
1.
Connect the instrument to the [INPUT 1] jack on the MRS-4 (
p. 8).
2.
Press the [ON/OFF] key 1 so that the key lights up.
The [ON/OFF] keys 1/2 serve to activate their respective inputs. When the key is lit, the
input is active.
To r ecord from an instrument with stereo output such as a synthesizer, connect the L/R
output of the device to the [INPUT 1]/[INPUT 2] jacks and set both [ON/OFF] keys 1/2 to
ON.
The MRS-4 can accept up to two simultaneous input signals.
3.
While playing the instrument, use the [INPUT LEVEL] control 1 to adjust the input
sensitivity.
The signal input level appears on the level meter (IN) in the left part of the display. Adjust
the control so that the 0 dB indicator does not light when you play the instrument at the
loudest level.
0
INPUT 1 level
INPUT 2 level
Adjusting input sensitivity
2-1
Recording the first track Step 2
ZOOM MRS-4
12
LIMIT 0
LIMIT 9
This effect suppresses signal peaks to keep the input signal below a certain
level. During stereo recording, the effect monitors both inputs. Higher setting
values produce stronger limiter action.
Algorithm 1
( LIMIT 0 – LIMIT 9 )
Algorithm 2
( COMP 0 – COMP 9 )
Algorithm 3
( CAB CO, CAB BC, CAB ST )
COMP 0
COMP 9
This effect compresses the signal when the input signal exceeds a certain
level. During stereo recording, the effect monitors both inputs. Higher setting
values produce stronger compressor action.
CAB CO
CO
BC
ST
CAB BC
CAB ST
This is a cabinet simulator that duplicates the sound of a guitar amplifier. It is
useful when a distortion effect is connected between the guitar and the input
of the MRS-4. The abbreviation on the right indicates the amp type.
Combo amp
Bright combo amp
Stack amp
Insert effect algorithms
Basic Operation
Basic Operation
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Zoom MRS-4 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Zoom MRS-4 in the language / languages: English as an attachment in your email.

The manual is 0,84 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Zoom MRS-4

Zoom MRS-4 User Manual - German - 64 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info