533776

Zoom MRS-1608 Manual

46
Zoom out
Zoom in
Previous page
1/224
Next page
Reference [Recorder]
ZOOM MRS-1608
46
When pressed, a key lights up, and the corresponding
input is active.
4.
While the instruments are played, adjust
the [INPUT] controls to obtain a suitable
input sensitivity level.
When using the GUITAR/BASS INPUT jacks 1/2,
perform the adjustment with the [GUITAR/BASS
INPUT] control 1/2 on the front panel.
5.
To use an insert effect, press the [INPUT
SOURCE] key in the effect section, and
press the [ON/OFF] key for the input to
which you want to apply the effect.
The respective [ON/OFF] key lights up orange, and the
insert effect is applied. When 8x COMP EQ is selected as
algorithm for the insert effect, all channels can be
processed by the effect. Otherwise, two selected channels
can be effect-processed.
HINT
In the default condition of a project, a patch suitable for
guitar/bass playing is selected as insert effect. If necessary,
select a different patch (
→
p. 139).
6.
While the instruments are played, use the
[REC LEVEL] control to adjust the
recording level.
Set the recording level as high as possible, but avoid
settings that cause the [CLIP] indicator to light. The
current signal level can be checked with the level meters
IN1 – IN8.
7.
Repeatedly press the status keys for the
tracks (1 – 8) to be recorded so that the
keys are lit in red.
Up to eight status keys can be activated simultaneously.
When a track is switched to the recording standby
condition, the signal from the input mixer will be sent to
the corresponding recording track.
If the [ON/OFF] key for a track is ON but the corresponding
status key is lit green (or is off), the respective input will not
be recorded.
8.
Move to the start point of the recorder, and
start recording.
When recording is finished, stop the recorder.
9.
To cancel the 8-track recording condition,
press the [8TRACK RECORDING] key.
The key goes out.
This function lets you set marks at any recorder position,
and return to the mark using a simple operation. Up to
100 marks can be set.
HINT
• It is also possible to switch mixer settings or effect setting
groups (scenes) at a marked position (
→
p. 84).
• When creating an audio CD, marks can be used to provide
index information. This will allow the CD player to access
specific points within tracks (
→
p. 155).
Setting a mark
Here’s how to assign a mark at the desired location in a
song.
1.
Locate the point to which you want to
assign a mark.
HINT
•A mark can be assigned either during playback or when
stopped.
•You can use the scrub function (
→
p. 38) to locate the
position with high precision.
2.
Press the [MARK] key in the control
section.
A mark will be assigned to the current location. The mark
number will appear in the MARKER field of the counter.
The MARKER field shows the number of the mark at the
current position or the closest preceding mark. When the
current position matches the mark, a marker symbol
appears to the right of the mark number.
Marker function
Mark number
Marker symbol
307
307
2
2
0 01
01
1608E.book 46 ページ ２００４年４月１９日　月曜日　午前１０時４４分
… 46 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Zoom MRS-1608 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Zoom MRS-1608 in the language / languages: English as an attachment in your email.

The manual is 6,39 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Zoom MRS-1608

Zoom MRS-1608 User Manual - German - 224 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info