533776

Zoom MRS-1608 Manual

43
Zoom out
Zoom in
Previous page
1/224
Next page
Reference [Recorder]
ZOOM MRS-1608
43
◆
Selecting the recording destination V-
take
By default, the result of the bounce operation will be
recorded on the V-take that is currently selected for the
recording track(s). To play back a track while bouncing onto
another V-take of that track, you can use the following
procedure to change the recording destination V-take.
1.
From the main screen, press the [UTILITY/
TRACK EDIT] key.
The indication “UTILITY TR EDIT” appears on the display.
2.
Use the cursor left/right keys to bring up
the indication “UTILITY BOUNCE” on the
display, and press the [ENTER] key.
3.
Use the cursor left/right keys to bring up
the indication “BOUNCE REC TAKE” on the
display, and press the [ENTER] key.
The current setting is shown.
The indications have the following meaning.
• CURRENT:
The bounce result will be recorded on the V-take currently
selected for the recording track (default setting).
•1 – 10:
The bounce result will be recorded on the V-take of the
recording track with the specified number.
4.
Turn the dial to specify the recording
destination V-take.
5.
To return to the main screen, press the
[EXIT] key several times.
Executing bounce recording
This example explains how to bounce the contents of
tracks 1 – 16 and the drum/bass tracks onto V-take 10 of
tracks 15/16.
1.
Refer to “Making bounce settings” and set
the bounce target track to “PLAY”.
2.
Refer to “Making bounce settings” and
select V-take 10 for the bounce target
track.
3.
From the main screen, press the status
keys of tracks 15/16 repeatedly, so that the
keys are lit in red.
Tracks 15/16 are now ready for recording.
4.
Press the [BOUNCE] key in the control
section.
The key lights up and the bounce function for the target
tracks is turned on. Other tracks and effects function
normally.
5.
Set the recorder to playback and adjust the
mixing balance of the various tracks.
The individual track level settings as well as the insert
effect and send/return effect settings all have an influence
on the mixed signal that is sent to the bounce target
tracks.
Adjust levels while watching the L/R level meter, and
make sure that no signal clipping occurs.
6.
Move the recorder to the beginning and
start recording.
Recording on tracks 15/16 starts.
7.
When recording is complete, press the
STOP [P
] key.
HINT
•To check the result of the bounce operation, select the V-
take for the bounce target tracks and mute the other
tracks. Note that the track parameters will continue to be
valid. To monitor the unprocessed sound, return the track
volume and EQ settings for the bounce target tracks to the
default condition. When bouncing in stereo to two mono
tracks, set the Pan parameter for the odd-numbered track
to L 100 and for the even-numbered track to R 100.
• If only the signal from the drum track or bass track is
recorded, refer to ”Selecting drum/bass track as recording
REC TAKE
REC TAKE
CURRENT
CURRENT
1608E.book 43 ページ ２００４年４月１９日　月曜日　午前１０時４４分
… 43 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Zoom MRS-1608 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Zoom MRS-1608 in the language / languages: English as an attachment in your email.

The manual is 6,39 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Zoom MRS-1608

Zoom MRS-1608 User Manual - German - 224 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info