533776
29
Zoom out
Zoom in
Previous page
1/224
Next page
Quick Tour
ZOOM MRS-1608
29
When you have finished recording all tracks, you can use the
built-in mixer to adjust parameters such as volume level, EQ
(equalizer), and panning (stereo left/right positioning) to
create a pair of stereo tracks.
4.1 Turning off the input and
rhythm section
In order to keep unwanted signals from being included in the
mix, you should turn off the input and the guide rhythm from
the rhythm section.
1.
To mute the rhythm section, press the
[DRUM]/[BASS] status keys so that the keys
go out.
2.
To mute the input, press the [ON/OFF] key for
the input where the instrument is connected,
so that the key goes out.
HINT
If desired, you can add the drum kit/bass program sound and/or
sound from input signals to the mix.
4.2 Adjusting volume, panning,
and EQ
Adjust the volume, panning, and equalization for each track
by controlling the track parameters of the built-in mixer.
1.
To adjust the volume balance between tracks,
operate faders 1 – 8, and faders 9/10 – 15/16.
By operating faders of a pair of stereo tracks, you can adjust
the left/right balance.
2.
To adjust the EQ and panning for each track,
press the respective key in the track
parameter section.
3.
Use the cursor left/right keys or the status
keys to select the track for which you want to
make a setting.
While the track parameter display is shown, the status keys
and cursor left/right keys can be used to select a track. The
status key for the currently selected track is lit in orange.
4.
Turn the dial to select the setting value.
5.
Use the cursor up/down keys or the keys in
the track parameter section to select a track
parameter, and adjust other parameters in
the same way.
When a parameter is displayed, pressing the corresponding
key in the track parameter section toggles the parameter
between on and off.
The parameters that can be selected for tracks 1 – 8 and
tracks 9/10 – 15/16 are listed in the table on the next page.
HINT
In the default condition of a project, the SUB-OUT SEND LVL
and SUB-OUT SEND PAN parameters are turned off. For
information on how to control these parameters, see page 82.
Some track parameters (level, EQ, panning/balance, send/
return effect intensity etc.) can also be used for the drum/bass
track and input signals.
Step 4: Mixing
Orange
TR3
TR3
EQ HI G
EQ HI G
0dB
0dB
TR3
TR3
EQ HI G
EQ HI G
+6dB
+6dB
1608E.book 29 ページ 2004年4月19日 月曜日 午前10時44分
29


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Zoom MRS-1608 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Zoom MRS-1608 in the language / languages: English as an attachment in your email.

The manual is 6,39 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Zoom MRS-1608

Zoom MRS-1608 User Manual - German - 224 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info