533776
25
Zoom out
Zoom in
Previous page
1/224
Next page
Quick Tour
ZOOM MRS-1608
25
section lights up occasionally when you play the instrument
at the loudest level.
When using the GUITAR/BASS INPUT jack
When using the INPUT jack
4.
While playing the instrument, use the [REC
LEVEL] control to adjust the recording level.
The [REC LEVEL] control modifies the signal level going
to the recorder (after passing the insert effect). Watch the
IN1 level meter in the lower left of the display and set the
level as high as possible, but avoid settings that cause the 0
dB indicator segment to light during play peaks.
If the recording level setting is too high, the [CLIP] indicator
of the [REC LEVEL] control lights up.
2.2 Applying the insert effect
The signal supplied to the MRS-1608 can be modified with
the insert effect. This effect can be applied to the input, to
any track, or immediately before the [MASTER] fader. The
insert effect actually is a multi-effect unit that contains a
number of single effects (effect modules) such as
compressor, distortion, and delay, connected in series.
The following steps show how to select an algorithm and
apply the insert effect to the guitar signal connected to the
GUITAR/BASS INPUT jack.
1.
Press the [INPUT SOURCE] key in the effect
section.
The insert position of the insert effect is indicated on the
second line of the display. The default is “IN” (INPUT). If
another setting is currently selected, turn the dial to select
“IN”.
2.
Use the [ALGORITHM] keys in the effect
section to select the desired algorithm.
A combination of effect modules that can be used
simultaneously is called an “algorithm”. The MRS-1608 has
9 algorithms which are controlled by the [ALGORITHM]
keys in the effect section.
The following selections are available.
CLEAN
DIST
ACO/BASS SIM
BASS
These algorithms are suitable for recording guitar/bass.
MIC
An algorithm suitable for vocals and other microphone
recordings.
DUAL MIC
An algorithm with two entirely separate mono input and
mono output channels.
8x COMP EQ
An algorithm with 8 separate input/output channels.
Different high-pass filter, compressor, and EQ settings are
possible for each channel.
LINE
An algorithm suitable mainly for recording line-level output
Front panel
May briefly flash
May flash briefly
[CLIP] indicator
INPUT 1 – 8 level
1608E.book 25 ページ 2004年4月19日 月曜日 午前10時44分
25


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Zoom MRS-1608 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Zoom MRS-1608 in the language / languages: English as an attachment in your email.

The manual is 6,39 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Zoom MRS-1608

Zoom MRS-1608 User Manual - German - 224 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info